|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: The Dman is getting ready to Tweak again!!!!!!! (John Curl, anybody...HELP!!!?) posted by Dman on August 14, 2001 at 01:31:36:
I've done a few Denon's in the past.I started by odering the schematic from the service center. Then I could plan better what to change. But, as always you can do the main power supply and output stage with the need of schematic. To do any unit its always the same routine. Look it over to get to know whats what. In a Cd player there is the laser and servo section, the main processor, the DAC or DAC's, the output section with mute, and the power supply or supplies. With only a voltmeter you can determine what voltages are used and where the by-pass caps are. In every unit I do I always add or replace the by-pass caps with large value caps. Sometimes I end up with a forest of caps but the units always work better for it. I hope this helps, good luck, bobwire
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: The Dman is getting ready to Tweak again!!!!!!! (John Curl, anybody...HELP!!!?) - bobwire 07:35:43 08/14/01 (1)
- Re: The Dman is getting ready to Tweak again!!!!!!! (John Curl, anybody...HELP!!!?) - Dman 17:14:22 08/14/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
