|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: What does it mean and posted by Duk on June 6, 2001 at 11:27:37:
You can usually 'drop in' the OPA604 but if the NE5534 is using the compensation pin you need to remove the cap that is tied to pins 5 and 8. You will also need to remove any balance pot that may be connected to pins 1 and 8. The balance potentiometer probably is not used in you circuit but the compensation cap probably is. My advice is to check what is connected to pin(s) 1, 5 & 8 and plug the 604 in and enjoy.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- You can drop it in but... - Comm-Tronix 21:36:22 06/06/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
