|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: building an isolation platform for amps posted by orejones on May 16, 2001 at 16:06:17:
is to interface with the outer layers of the platform so as to allow the transer of vibrational energy, which it converts to heat via work.Bubble wrap will not interface with the outerlayers of the platform, no energy will be transferred and therefore converted to heat energy. Bubble wrap will (partially) isolate the component from external vibration but at the same time prevent internally generated vibration from reaching ground, thus reflecting it back into the shelf and therefore the component.
Bubble wrap is a partial isolation device. Foam offers a mechanical impedence and energy ground. 2 very different, non-interchangable functions.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- The purpose of the foam - Steve 16:27:53 05/16/01 (3)
- Re: The purpose of the foam - orejones 05:35:41 05/17/01 (0)
- if you want to do that.... - dave c 16:50:50 05/16/01 (1)
- or another approach that is very good - kye 02:35:19 05/17/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
