replacing speaker post jumper

Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

198.147.38.151

I posted this on the speaker forum but got no responses. Thought I'd try it here. I apologize for the double posting.
I have passive Linn Keilidhs. I am currently just single wiring them and using the original metal jumper between the biwire plugs. I was thinking about switching to biwiring, but also wanted to experiment with swapping the metal jumper with speaker cable. I need some advice, though.
The Keilidh is designed to be used with banana plugs; the speaker terminal is basically a threaded screw and a nut (with a hole for the banana plug to be inserted). Would I take each end of the speaker wire, connect the two exposed threads on each end, wrap the connected ends around the bass and treble screws, and then re-affix the nuts to hold them in place?
Anyone have experience with this? Thanks.

This post is made possible by the generous support of people like you and our sponsors:

Kimber Kable

Topic - replacing speaker post jumper - imrer 12:01:38 02/07/01 (0)

You can not post to an archived thread.