|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Speaker ENACOMs posted by geoffkait on November 11, 2000 at 15:12:07:
I am not sure if I read it correctly, but by constructing the device below, the power will be cleaner and the sound will be better , right?
Recommended capacitor type and values for a single plug-in unit use in AC line to neutral adaptors:
Four 10 microfarad 400-600 volts DC metallized polypropylene film caps, connected in parallel and bypassed by at least one .47 microfarad and one .01 microfarad 400-600 volts metallized polypropylene cap.The neutral-to-earthground connected capacitors can be much larger (higher capacitance) and lower voltage rating than the AC caps.
Recommended for each neutral to earth ground plug-in adaptor: one 100-220 microfarad, one 10 microfarad, and one 0.47 microfarad metallized polypropylene film cap, connected in parallel (all caps 100 VDC or greater, no resistor needed).
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- So connecting caps from Live to Neutral in AC is effective? - chuck 21:37:30 11/14/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
