|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Need Help. 10K Passive Pre is Way Too Loud posted by Ethan on November 8, 2000 at 20:50:40:
Sounds like you used a linear taper pot. For use as an audio volume control, one must use a log taper pot. This keeps the volume from coming on almsot immediately.The value you have chosen is OK, do not try to pad this, the taper will still be wrong, and you are more likely to mess up the electrical situation and adversely load the pot or the source. You need a new pot with the log taper.
Jon Risch
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- It's not the value, it's the taper - Jon Risch 21:59:09 11/08/00 (2)
- Thanks for the suggestion, but it has an audio taper <nt> - Ethan 06:41:04 11/09/00 (1)
- Re: Thanks for the suggestion, but it has an audio taper <nt> - Jon Risch 10:45:07 11/09/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
