|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Capacitance between chassis and circuit common ground. posted by Dave Ingels on November 9, 1999 at 10:03:19:
While constructing the "good" amp I used an epoxy to fasten the caps to the chassis. While using a percussive spring loaded center punch to start a drill hole, they became unfastened and I redid the epoxy job on top of the old one (therefore creating extra insulation). In constructing the "bad" amp I was careful to tap and drill before mounting the caps so what you suggest is very possible and fits what I found troubleshooting like a glove. Thank you very much for pointing out that capacitor construction factiod. I owe you a beer.Tom §.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Bingo. - Tom §. 10:16:31 11/09/99 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
