|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: John Curl & Thorsten; Re: Solder posted by ljordan on July 11, 1999 at 17:27:48:
I would use fresh solder that isn't oxidized badly on the outside. It should look bright and shiny. For your application, a good eutectic alloy of Sn63 Pb37 would suffice or if you can find it, Sn96.5 Ag3.5 would work well and it's lead-free. The alloy I was refering to is probably too difficult to obtain right now but if you get lucky and find Sn95 Ag4.5 Cu0.5, go for it!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: John Curl & Thorsten; Re: Solder - Dave B 14:22:22 07/12/99 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
