|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Do this search posted by bartc on March 26, 2007 at 05:44:45:
Thanks for the help. I have another question, however. Why does Al recommend having the resitor in series with the caps while Magnan says the resistor should be in parallel to dissipate the charge from the caps when unplugged? Sorry if this is ignorant, but it seems to be an important difference and I don't know enough about AC power to understand the difference of opinion
Also, can one use normal resistors, or is there some special type people like for this application? I known Al recommends PRP resitors for the speaker R-C filters, but for AC I don't know... Thanks
Chris
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: series or parallel - cporada@cabnr.unr.edu 10:50:37 03/26/07 (4)
- Series for dynamic damping. - Al Sekela 15:57:24 03/28/07 (2)
- Re: Series for dynamic damping. - cporada@cabnr.unr.edu 16:14:54 03/29/07 (1)
- See my answer above. - Al Sekela 15:56:47 03/30/07 (0)
- Can only answer one part - bartc 17:34:47 03/26/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
