|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Found a much more cost-effective way to raise my speaker wire off the floor posted by FrankC on August 15, 2006 at 19:55:52:
Simply took white porcelain teacups of suitable size and weight (I liked the white in my system - get your own color and design), filled them with sand or kitty litter in plast bag, epoxied a similar color porcelain ramekin on the bottom, epoxied a similar color porcelain chopstick holder on the top. Then cut a circle of neoprene rubber for the bottom and glopped white silicone (pure) on top of the chopstick rest. I ended up with a neat looking, well functioning set of all white porcelain cable risers suited to my taste.Al Sekela uses an even simpler device in his setup: card stock tube filled with kitty litter and wrapped in teflon plumbing tape. His work real well too. And his is really just a variant on one of the oldest designs for these: inverted toilet paper rolls!
There are so many easy and cheap ways to make cable risers that it's foolish to spend on the high priced spread....
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I DIYed these for under $2.50 USD each - bartc 20:37:26 08/15/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
