|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Source for OFHC bars posted by Paul_A on January 28, 2006 at 11:06:23:
For fine silver plate try Myron Toback. They sell in fairly small amounts although they do have a minimum.
The stock jumpers which come with most speakers are gold plated brass: bad stuff. Kimber makes a juoer in their select line. It is very good although not cheap at $250 per set, IIRC.
I find simply making a wire jumper will outperform most jumper plates. Much easier and the parts are very readily available. I did have fine silver sheet stock and tried making my own spades. It works well but now that they are commercially made I find it easier, and cosmetically nicer to use those. Sound Connections has a true OHFC spade gold plated, BTW.Good luck.
Stu
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Source for OFHC bars - unclestu52 11:48:12 01/28/06 (1)
- Thanks for the info. That helps. (nt) - Paul_A 11:49:33 01/28/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
