|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Different frequency ranges. posted by Al Sekela on October 31, 2005 at 13:12:51:
I can certainly make the BEST potential hard/smooth interface for the top of the bearing by inverting another knob, just like the cup, with the stem trimmed or cut off. I can insert that into some support material to widen the support for the chasis - support could be ply, acrylic, etc. Can put nothing or a thin layer of something damping between that and the component bottom, like maybe even some Dynamat. Do NOT want to use polyurethane glue on that though!Think that would work? Would that still be an advantage over simply resting component bottom right on top of the ball as it is now?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Another tack, then - bartc 19:47:57 10/31/05 (1)
- Try Museum Wax. - Al Sekela 17:49:38 11/03/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
