|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Jon Risch DYI Bass traps posted by ausjoe on October 23, 2005 at 10:25:45:
There are a number of variables involved, and I experimented with a number of them, and found to my dismay, that you could not scale or extrapolate too much from a known good set of parameters.Yes, you can use thicker material of the same starting density, and not compress it down any more than the final design density, but there is a limit. 8" can be done OK, but I don't think that 10" would be a safe bet, even with some compensating extra compression.
BTW, I would use a spacing of 2.375", or an inner diameter of 13.25" for an 18" outer diameter.
The 18" diameter is about as large as I would attempt, as the large size is very unwieldy and difficult to manage and work with, ESPECIALLY of you have not ever done one before.
Jon Risch
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Jon Risch DYI Bass traps - Jon Risch 18:55:19 10/23/05 (1)
- Re: Jon Risch DYI Bass traps - ausjoe 20:18:11 10/23/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
