|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Onkyo HT-R500 A/V receiver stuck in protection mode posted by K-Bob on August 6, 2005 at 21:04:16:
It sounds like something is shorted in the output stage of
the amp. Have you checked to make sure there are no fuses on
the inside that could be blown. I would contact Onkyo
tech support and ask them about it. If they give you some
things to check and you are handy, then you might be able
to fix it yourself. But if its several years old and you
take it to a shop, it might cost more than whats its worth
to fix it. If its out of warranty see if you have a local
electronics shop that will give you an estimate. If its
still under warranty you will have to take it to a shop
of Onkyo's choosing. Good luck...Bill
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Onkyo HT-R500 A/V receiver stuck in protection mode - bboroski 18:39:45 08/07/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
