|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: DIY Armageddon - Tweak the tweak? posted by OnlyAudio on July 21, 2005 at 09:04:42:
Hi there!What are your objectives with this tweak ?
Improve freq. stability ? - It won't do that.Improve rpm stability ? - Same as above.
Improve mains THD ? - Same as above.
Lower motor vibration ? - same as above (and be careful about the actual voltage you get without the resistor, or you'll likely add more vibration).
Filter the mains ? - depending on trafo BW, it will probably filter a bit of HF noise. But that is totally irrelevant in this application.
So what exactly are the benefits ?
PS: I bet you're really set on doing this, regardless of what I say. So, may I give you a suggestion that will make your tweak actually change something for the better: Get a trafo with split secondaries and connect CT to ground. That way you get a "balanced" supply that will be less likely to couple hum noise to the rest of the equipment (namely the cartridge).
Bye.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: DIY Armageddon - Tweak the tweak? - passing_by 05:38:12 07/28/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
