|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: DIY Bass traps vs. duct board prism vs. bags o fiberglass... posted by Scholl on March 20, 2005 at 09:39:38:
What exactly do you mean by a "duct board prism"?If you mean a simple construction of stiff duct insulation, or something like ceiling tiles, then this will not perform very well at all, providing probably less than 20-30% of the absorption of a full blown DIY bass trap.
A set of fiberglass bags wrapped up with polyester batting, can be as much as 80% of the effectiveness of a DIY bass trap, if you use say, three 15" wide rolls stacked on end, in each corner.
A DIY bass trap can equal or exceed the absorption of one of the commercial products, depending on which one we are talking about.
Jon Risch
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Question - Jon Risch 10:20:44 03/21/05 (3)
- With regard to Bass Traps.... - 4yanx 13:44:52 03/22/05 (0)
- The prism you mention here.. - Scholl 03:24:14 03/22/05 (1)
- Re: The prism you mention here.. - Jon Risch 15:31:14 03/24/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
