|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: One channel won't be loaded correctly posted by Johnnybegood4 on December 22, 2004 at 17:14:48:
All you've done is check for continuity between those two points. You have not yet ruled out a short between center and outer on the input jack nor measured the resistor. If you need a replacement resistor, simply get a 5-pack at your local Radio Shack this week-end; you can always replace with *super-duper quality* ones later if you want but that 47K-to-common does establish the phono stage's input impedance and therefore the correct loading for your cartridge. Your problem will reside where you worked on it, not elsewhere.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: No - Ron Oehlert 10:02:23 12/25/04 (1)
- Re: No - Johnnybegood4 06:51:26 12/26/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
