|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Help!My Walker SST is going to dry out posted by uwe on December 12, 2004 at 05:24:20:
If the SST has gotten stiff or partially dried out, take a toothpick and stir the material well. That will restore some of its viscosity. If the material has gotten too dry to apply, and stirring doesn't help, call or email Walker Audio. Lloyd has a recommended procedure he'll discuss with you.For storage, Lloyd recommends the electrician's tape and freezing tip shared below.
As to SST drying on the terminations themselves, this doesn't change the effectiveness of the treatment.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Recommendations I got from Walker Audio... - Rushton 18:37:13 12/14/04 (1)
- Re: Recommendations I got from Walker Audio... - uwe 04:31:17 12/15/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
