|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Carbon dust is a carcinogenic so be careful. posted by Tony D. on June 27, 2004 at 22:36:13:
There are specialty graphite companies that can do intense 3D machining. If you can give them specs, they can cut it , turn it, whatever you need. My first step was to seal the graphite with varnish to lock the particles. It now handles like a clean material. Raw graphite is dirty as all get out. If I were planning to work it with a power tool I would use a HEPA grade respirator, the ones with the pleated dust filters. The common hardware store dust masks are passable for drywall sanding and coarse sawdust, barely. But grind graphite at home ? Yow..... you'de never get the soot off.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- try to have the machining done by the supplier - tonemaniac 05:44:13 06/28/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
