|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
I have decided to build the base traps per Jon Risch's diy notes using the
705 panels. Questions are: 1. Where do you get them. 2. Should I get faced or unfaced panels. 3. Are these equal to or better than the tube traps using the hog wire and 6 inch fiberglass. 5. I have a 8 or 9 db base boost at around 25 to 38 Hz. Will these provide any help at that low of frequency?Thanks for your help.
Roland
This post is made possible by the generous support of people like you and our sponsors:
Topic - Owens Corning 705 base trap - Roland 10:53:29 02/24/00 (8)
- Ownes Corning is a dead end - Mike 07:32:31 02/27/00 (5)
- Not So, just need to do it right - Jon Risch 21:41:06 02/28/00 (2)
- Re: Not So, just need to do it right - Mike 12:35:32 02/29/00 (1)
- Re: Not So, just need to do it right - Jon Risch 17:48:21 02/29/00 (0)
- Re: Ownes Corning is a dead end - ChrisY 12:00:24 02/27/00 (1)
- Re: Ownes Corning is a dead end - Mike 06:47:42 02/28/00 (0)
- Re: Owens Corning 705 base trap - Jon Risch 21:26:25 02/25/00 (1)
- Thanks Jon- I will follow your recommendation (NT) - Roland 05:51:52 02/26/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
