|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Vifa transmission line posted by Scott Thomson on February 21, 2000 at 21:05:47:
After looking over your design I would say this. Do yourself a favor and impedence compensate your driver before you finish putting it together. Why? Because without compensation the crossover freq will wander with each new frequency it sees. Crossover blurr is a way of looking at it. With each driver comensated they look like resistors to the crossover and the network as well as your amp will love it. Power amps lover to drive resistors thet are very flat when they do! Good Luck, bobwire
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Vifa transmission line - bobwire 14:34:48 02/22/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
