|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: need a good DIY speaker stand posted by scott on January 31, 2000 at 17:15:30:
There are many ways to make a speaker stand , each one require some work ,manual ability and money . A very basic one is to buy concrete blocks , they are heavy , and put each one over the other until you have the desire height ( 30" - 36" with minimonitors ). The one with plywood is a good project too . I f you have someone with a soldering machine , you can buy a metal tube 20' by 3" in diameter or 3" by 3" and make 8 pieces of 29"-30" . Them , find 2 top and 2 base plates and get it solded . Drill the central point of each 30" pieces so you can filled with sand . At 3/4" of each botton base corner drill 1/4" holes for spikes. Use a granite like paint and you are ready to rock .ooooooooo
xxx xxx
xxx xxx
xxx xxx
xxx xxx
xxx xxx
xxx xxx
xxx xxx
00000000000
\/ \/ top 1/2 - 3 - 1- 3 - 1/2 inches separation front to back
bottom 10x12 : 11/2 - 3 - 1 - 3 - 11/2 front
21/2 - 3 - 1 - 3 - 21/2 backGook luck , remenber write it down a plan before any work .
PS centralize the image to see the intended diagram as the measurements indicate .
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: need a good DIY speaker stand - Jose 18:57:15 02/01/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
