|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Felt for speaker bafles posted by Rob Bertrando on January 25, 2000 at 20:36:23:
Excuse me if this is not what you're looking for...you probally seen these already. "Dynaclear Tweeter Lensses" at Audio Avisor under accessories. It gives you universal dimensions plus a picture of how they are supposed to look like. I made some myself and cutting out the inner circle first was overall better than cutting out the bigger circle first. I have elipse templates and used x-acto blades to cut them out. I measured the tweeters first and looked at the Pipe Dreams speakers as reference. Also a light spray from a distance of spray fix "3m Super77" should do the job and let dry for a couple of minutes. To take more of the adhesive off just pat a couple times over carboard and then positioning should be easy as it will peel on and off like a "post it"Good Luck
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Tweeter Lenses??? - Joven 19:05:26 01/26/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
