|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Advice needed for DIY Wall Wart replacement for Creek posted by tloftis on September 15, 2000 at 08:13:45:
Hi,>Can you give me a little more info on how to do this?
Pick up a parts express Catalkogue, oder the batteries and the charger (see if they do an electronic module for internal mounting), a 4-pole 2-position switch (rotary recommended) and a suitably large enclosure.
Wire the switch so that it switches between the batteries connected to the Preamp and connected in series with each other (giving 24V with 6 Ampere for 1 hour or 0.6 Ampere for 10 Hours) and between the batteries in parallel and connected to the charger.
Fit a lead so it can connect to the Creek. I'd use two length of good solid core copper coax, shield against the case in the supply, the two cores being +/-.
Okay?
Later T
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Advice needed for DIY Wall Wart replacement for Creek - Thorsten 10:49:44 09/15/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
