|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: wisdom of replacing captive opwer cord? posted by rcrump on July 13, 2000 at 06:47:23:
i took off the back cover plate that the power switch and power cord are attached to. it is only 2" by 4" and could easily be drilled to accept the IEC connector. but when i took off the bottom cover the power cable separates and dissapears into the extremely intimidating bowels of the amp. the other issue is that an IEC connector will allow me to try different cords. thankyou for your thoughts, any other ideas and comments would be appreciated.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: wisdom of replacing captive opwer cord? - mikel 09:18:19 07/13/00 (1)
- Re: wisdom of replacing captive opwer cord? - rcrump 12:03:01 07/13/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
