|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: question on diy digital cable posted by paco on May 30, 2000 at 03:19:30:
Paco..
I hope that you are enjoying your new digital incon, and the design is interesting... (have you carried out any impedance measurements on it??)WRT the screen, it should be connected at ONE end only, but IMO, you will find the sound will 'close in' a bit... experiment with orientation of the screen connection (source end or target end), to determine the directionality of the cable... the difference is usually stark.
personally, I do not use shields at all, and have had no problems with interference (transmitted or recieved) because I use twisted pairs almost exclusively (they are inherently good at rejecting interference without requiring a shield)
Enjoy..
Owen
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: question on diy digital cable - Owen 03:46:57 05/30/00 (1)
- Re: question on diy digital cable - paco 03:13:26 05/31/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
