|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
|
|
Tweakers' Asylum Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ. |
|
In Reply to: Re: Crossover cap bypass -- suggestions? posted by daryl on April 20, 2000 at 08:27:10:
I have a Jolida 502B and did several mods in it.
I replaced the original volume pot with a TKD 50K (Michael Percy carries it). Very transparent, but expensive too: around $50-60. It fits perfectly between the front plate and PCB. You just have to widen the mounting hole a few mm, use a step drill bit if you can. Don't forget to take the balance pot out of the loop.If you have a Jolida that uses 12AX7 (I think they all do), try NOS Sylvania. I got a pair recently from Kevin Deal (Upscale Audio), and they sound phenomenal. Much better presence. It replaced NOS GE long plates that are also excellent but a bit on the bright side.
Happy tweaking.
Julien
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Jolida volume pot - Julien M. 09:41:55 04/20/00 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
