Post cable Q's in the Cable section of AA Please!

Tweakers' Asylum

Tweaks for systems, rooms and Do It Yourself (DIY) help. FAQ.

209.215.72.183

In Reply to: basic interconnect building question posted by mth on March 27, 2000 at 06:27:27:

What you want to do is option #4, solder the drain wire to ground at the source end of the cable only (preamp end for phono) for both channels, and make sure the drain and foil are insulated from the ground at the load end, and this means the barrel as well.
See:
http://members.xoom.com/Jon_Risch/i1.htm
AND
http://members.xoom.com/Jon_Risch/s1.htm
for more details on the whys.
Also check out the most recent few Cables section posts and archives, there has been some discussion of this here as well.
Jon Risch

This post is made possible by the generous support of people like you and our sponsors:

Sonic Craft

Follow Ups Full Thread

Topic - basic interconnect building question - mth 06:27:27 03/27/00 (3)

Post cable Q's in the Cable section of AA Please! - Jon Risch 10:32:34 03/27/00 (2)

thanks -- quick followup - mth 11:19:09 03/27/00 (1)

Re: thanks -- quick followup - Jon Risch 17:56:12 03/27/00 (0)

Follow Ups

Post cable Q's in the Cable section of AA Please! - Jon Risch 10:32:34 03/27/00 (2)

thanks -- quick followup - mth 11:19:09 03/27/00 (1)

Re: thanks -- quick followup - Jon Risch 17:56:12 03/27/00 (0)

You can not post to an archived thread.