300Bs or 2A3s for Lowther/AER in Oris 150 horns

Tubes Asylum

Questions about tubes and gear that glows. FAQ

Hi Inmates,
I am designing and have begun buying components for a pair of Lowther/AER PM4As in Oris 150 horns in a d'Appolita array with 18" dipole woofers above and below the horns. The system will be bi-amped. The Lowther/AERs in the Oris horns will be a 15 ohm load with a sensitivity of 106 to 108 dB/2.83v/m.
After over 30 years of SS and PP tube amps I'm going to try SETs. Most of the amps I've considered use 300B or 2A3 output tubes. Any responses concerning the pros and of thses two either in general or for my particular application would be very much appreciated.
Thanks in Advance,
Don Reid

This post is made possible by the generous support of people like you and our sponsors:

Schiit Audio

Topic - 300Bs or 2A3s for Lowther/AER in Oris 150 horns - Don Reid 23:58:33 04/18/03 (8)

I use the Beauhorns but - Norm 17:43:10 04/19/03 (0)

I think... - Brian C. 01:07:26 04/19/03 (6)

Source of 6C45s? - korneluk 06:31:56 04/19/03 (5)

Re: Source of 6C45s? E55L/8233 - AlexK 11:53:00 04/19/03 (2)

Paeng Projects, but no E55L - korneluk 16:43:45 04/19/03 (1)

Re: Paeng Projects, but no E55L - AlexK 17:15:07 04/19/03 (0)

Re: Source of 6C45s? - fatbottle 07:50:36 04/19/03 (1)

Agreed <nt> - Brian C. 10:24:00 04/19/03 (0)

You can not post to an archived thread.