Tubes Asylum Questions about tubes and gear that glows. FAQ

For Sale Ads FAQ / News / Events

AudioAsylum Trader Airline type RH7591SE - This is my latest single ended amp build, and an o... Prima Luna ProLogue 4 (For trade or sale) - I have a beautiful Prima Luna ProLogue 4 power amp...

• 7027(A) Question - baileyler 09:50:17 06/05/18 (1)
  • RE: 7027(A) Question - FenderLover 10:13:31 06/05/18 (0)
• Curious to know a reasonable normal lifespan of GE 6v6 tubes - Tweaker456 20:52:29 06/02/18 (13)
  • 1940s Magnavox console with 6V6 ST-coke bottles - FenderLover 08:32:10 06/05/18 (0)
  • RE: Curious to know a reasonable normal lifespan of GE 6v6 tubes - Caucasian Blackplate 09:37:07 06/04/18 (0)
  • RE: Curious to know a reasonable normal lifespan of GE 6v6 tubes - 6bq5 11:18:26 06/03/18 (0)
  • 1957 Fender Harvard amp. - FenderLover 07:37:54 06/03/18 (3)
    • RE: 1957 Fender Harvard amp. - SteveSchecter 05:20:27 06/04/18 (1)
      • Schumacher start supplying some PT, to Fender - FenderLover 07:14:55 06/04/18 (0)
    • RE: 1957 Fender Harvard amp. - buffy 13:20:05 06/03/18 (0)
  • 5-10K hours is the target I see mentioned in the Electronic magazines from early 40s. - Byrd69 07:35:27 06/03/18 (0)
  • RE: Curious to know a reasonable normal lifespan of GE 6v6 tubes - Steve O 07:11:07 06/03/18 (0)
  • RE: Curious to know a reasonable normal lifespan of GE 6v6 tubes - samstone 06:13:28 06/03/18 (0)
  • RE: Curious to know a reasonable normal lifespan of GE 6v6 tubes - Triode_Kingdom 21:21:23 06/02/18 (2)
    • RE: Curious to know a reasonable normal lifespan of GE 6v6 tubes - Tweaker456 12:08:01 06/05/18 (0)
    • RE: Curious to know a reasonable normal lifespan of GE 6v6 tubes - Mechans 15:00:26 06/04/18 (0)
• Anybody using the 6350 twin triode? - DAK 12:45:37 06/02/18 (0)
• Anybody using the 6350 twin triode? - DAK 12:41:09 06/02/18 (7)
  • VTL used them in a number of power amps - E-Stat 20:57:43 06/04/18 (0)
  • Joule-Electra used them in a bunch of thier gear - Rich Brkich 18:06:36 06/02/18 (0)
  • RE: Anybody using the 6350 twin triode? - Caucasian Blackplate 15:24:16 06/02/18 (4)
    • I can see that from the tube description - DAK 20:52:54 06/02/18 (2)
      • RE: I can see that from the tube description - Caucasian Blackplate 08:13:38 06/03/18 (0)
      • RE: I can see that from the tube description - Triode_Kingdom 21:31:25 06/02/18 (0)
    • Similar including non-linearities - Triode_Kingdom 19:15:37 06/02/18 (0)
• Toob noob question (longish) - tlea 08:32:33 06/02/18 (4)
  • RE: Toob noob question (longish) - Caucasian Blackplate 09:09:15 06/02/18 (3)
    • RE: Toob noob question (longish) - Mechans 14:27:37 06/02/18 (2)
      • RCA red 5693 - FenderLover 17:56:18 06/02/18 (1)
        • RE: RCA red 5693 - Permanent Waves 20:02:17 07/16/18 (0)
• 6J6 driver tube suggestions? - Duster 19:55:47 06/01/18 (7)
  • RE: 6J6 driver tube suggestions? - Mechans 14:41:44 06/04/18 (0)
  • RE: 6J6 driver tube suggestions? - Sondek 12:47:44 06/02/18 (1)
    • RE: 6J6 driver tube suggestions? - Duster 23:03:08 06/03/18 (0)
  • RE: 6J6 driver tube suggestions? - airtime 12:22:05 06/02/18 (0)
  • RE: 6J6 driver tube suggestions? - Caucasian Blackplate 08:33:16 06/02/18 (2)
    • RE: 6J6 driver tube suggestions? Listen Indeed ... - Mechans 14:55:46 06/02/18 (1)
      • RE: 6J6 driver tube suggestions? Listen Indeed ... - Duster 22:49:00 06/03/18 (0)
• Webcor 12AU7A "E" on the bottom Made in Great Britain...?? - popsy 16:22:47 05/31/18 (11)
  • Maybe Japanese Mullard - DAK 09:55:01 06/01/18 (5)
    • So the Made in Great Britain is false then? - popsy 11:30:58 06/01/18 (4)
      • RE: So the Made in Great Britain is false then? - DAK 22:55:28 06/01/18 (0)
      • RE: So the Made in Great Britain is false then? - Sondek 14:13:44 06/01/18 (0)
      • Most Japanese signal tubes I've seen have crosshatch seams - FenderLover 12:00:15 06/01/18 (1)
        • BTW... some Japanese made tubes are quite good. - FenderLover 18:47:54 06/01/18 (0)
  • Any small Philips/Mullard etched codes near the bottom? - FenderLover 17:46:19 05/31/18 (4)
    • Only thing i can seem to make out is RC11.... - popsy 18:16:24 05/31/18 (3)
      • Can you get a photo of it? - FenderLover 18:47:41 05/31/18 (2)
        • sure...here are a few.. - popsy 19:44:26 05/31/18 (1)
          • Seamed top looks Philips made - FenderLover 21:09:02 05/31/18 (0)
• Genalex Golden Lion 5ar4/gz34 reissue failure? - M. Vidal 15:45:34 05/31/18 (4)
  • RE: Genalex Golden Lion 5ar4/gz34 reissue failure? - Jim McShane 16:58:00 06/01/18 (0)
  • RE: Genalex Golden Lion 5ar4/gz34 reissue failure? - Palustris 08:10:54 06/01/18 (0)
  • RE: Genalex Golden Lion 5ar4/gz34 reissue failure? - Blackdog 18:38:30 05/31/18 (0)
  • RE: Genalex Golden Lion 5ar4/gz34 reissue failure? - 6bq5 17:01:31 05/31/18 (0)
• Bendix 5992 cool purple glow - DAK 13:24:03 05/26/18 (10)
  • Modern Russian (esp EH) output tube have blue glow - FenderLover 08:58:34 05/31/18 (0)
  • RE: Bendix 5992 cool purple glow - Triode_Kingdom 08:23:27 05/27/18 (8)
    • Kinda like this? - FenderLover 08:37:15 05/27/18 (7)
      • Here are the 2 5992 with the bluish glow - DAK 02:52:29 05/29/18 (1)
        • Nice photo! - FenderLover 06:18:12 05/29/18 (0)
      • Exactly. - DAK 09:00:32 05/27/18 (4)
        • Article - FenderLover 11:03:02 05/27/18 (3)
          • Very good article, TYVM! nt - DAK 17:49:45 05/27/18 (0)
          • RE: Article - Triode_Kingdom 11:37:07 05/27/18 (1)
            • Watermark... - Jonesy 17:46:00 05/27/18 (0)
• Severely warped records - akolegov 02:32:22 05/24/18 (5)
  • No Wait! This is pertaining! - DAK 09:45:25 05/26/18 (1)
    • don't forget the pepper and Worcestershire sauce - NuWave 08:35:42 05/29/18 (0)
  • RE: Severely warped records - Eli Duttman 14:33:03 05/24/18 (0)
  • might want to repost this in Vinyl Asylum - NuWave 09:13:39 05/24/18 (1)
    • RE: might want to repost this in Vinyl Asylum - akolegov 09:44:45 05/24/18 (0)
• Circuit for 242C amp - barhead 01:30:54 05/24/18 (2)
  • RE: Circuit for 242C amp - Caucasian Blackplate 09:30:34 05/24/18 (1)
    • RE: Circuit for 242C amp - barhead 04:18:22 05/26/18 (0)
• Need a warm sounding tube for a ARC VT60 - NuWave 09:09:36 05/22/18 (29)
  • Same question answered over at DIY audio about 6DJ8... - Tweaker456 23:45:49 06/04/18 (0)
  • RE: Need a warm sounding tube for a ARC VT60 - fstein 15:22:30 05/23/18 (0)
  • I agree with Jonesy - DAK 11:04:01 05/23/18 (2)
    • i'll try that - NuWave 13:02:50 05/23/18 (1)
      • Adjusting the bias should be easy - DAK 15:04:11 05/23/18 (0)
  • "learn how to adjust the bias" - Jonesy 19:18:28 05/22/18 (5)
    • adjusting the bias........... - NuWave 12:58:49 05/23/18 (4)
      • RE: adjusting the bias........... - Uncle Mike 17:06:55 05/23/18 (2)
        • RE: adjusting the bias........... - NuWave 12:05:28 05/24/18 (1)
          • RE: adjusting the bias........... - Jonesy 13:51:59 05/25/18 (0)
      • RE: adjusting the bias........... - Jonesy 13:56:31 05/23/18 (0)
  • RE: Need a warm sounding tube for a ARC VT60 - Stuben 11:25:36 05/22/18 (1)
    • RE: Need a warm sounding tube for a ARC VT60 - NuWave 12:22:25 05/22/18 (0)
  • RE: Need a warm sounding tube for a ARC VT60 - Jim McShane 09:38:26 05/22/18 (15)
    • is the Gold Lion the reissue? - NuWave 12:18:47 06/05/18 (5)
      • RE: is the Gold Lion the reissue? - Tidycat1 21:44:36 06/11/18 (4)
        • whoa....... - NuWave 08:25:44 06/15/18 (3)
          • RE: whoa....... - Tidycat1 21:01:29 06/17/18 (2)
            • RE: whoa....... - NuWave 09:46:38 06/18/18 (1)
              • RE: whoa....... - Tidycat1 21:21:16 06/19/18 (0)
    • "....and you only need one" - NuWave 08:21:46 05/23/18 (1)
      • RE: "....and you only need one" - Jim McShane 10:08:48 05/23/18 (0)
    • "You could also try a warmer toned input tube." +1 (nt) - Tre' 07:26:27 05/23/18 (6)
      • RE: "You could also try a warmer toned input tube." +1 (nt) - Mechans 18:37:21 06/03/18 (5)
        • so........ - NuWave 11:00:05 06/04/18 (4)
          • RE: so........ - deafbykhorns 16:48:11 06/20/18 (0)
          • RE: so........ - Tweaker456 22:28:16 06/04/18 (0)
          • RE: so........ - Tweaker456 22:06:28 06/04/18 (0)
          • RE: so........I was bummed believe me....... - Mechans 17:49:17 06/04/18 (0)
• OD3 vs OD3A vs OD3W - popsy 19:43:44 05/21/18 (3)
  • RE: OD3 vs OD3A vs OD3W - FenderLover 05:54:29 05/22/18 (2)
    • Any "sound" difference btwn the 3?? - popsy 14:53:22 05/23/18 (1)
      • Dunno about sound... - FenderLover 21:42:13 05/25/18 (0)
• Tubes in Acoustatville - Byrd69 17:04:12 05/19/18 (5)
  • Whole Lotta Panels! - E-Stat 14:02:41 05/21/18 (0)
  • RE: Tubes in Acoustatville - Sondek 17:59:36 05/19/18 (2)
    • RE: Tubes in Acoustatville - Cory M. 19:13:34 05/30/18 (1)
      • RE: Tubes in Acoustatville - Sondek 17:29:43 05/31/18 (0)
  • RE: Tubes in Acoustatville - AJ 17:18:13 05/19/18 (0)
• A Brief Vibrating Noise/Glow from Rectifier - steve.ott@kctcs.edu 10:27:32 05/19/18 (2)
  • RE: A Brief Vibrating Noise/Glow from Rectifier - Blackdog 12:58:43 05/19/18 (1)
    • Thank you [nt] - steve.ott@kctcs.edu 18:12:10 05/19/18 (0)
• Layered metals for GE 6L6GC anodes - Byrd69 19:55:42 05/12/18 (13)
  • Have you found similar info on Westinghouse 7591? - DAK 10:15:47 05/13/18 (12)
    • No info on Westinghouse 7591 (long) - Byrd69 10:16:09 05/14/18 (8)
      • Issue #20 VTV - FenderLover 07:13:08 05/15/18 (0)
      • Ah, the 50s and 60s. - DAK 10:47:46 05/14/18 (6)
        • "Oh don't you just love the capitalist system." Yes, actually. - Chip647 05:51:49 05/15/18 (0)
        • RE: Ah, the 50s and 60s. - Triode_Kingdom 13:25:24 05/14/18 (4)
          • There needs to be a better way - DAK 07:36:23 05/15/18 (3)
            • RE: There needs to be a better way - Stuben 06:58:29 05/16/18 (1)
              • " Neo-Liberal Capitalism" have no use for labels... let us call it CORRUPTION... both sides of the aisle.~nT - Cleantimestream 01:20:44 05/23/18 (0)
            • RE: There needs to be a better way - Uncle Mike 02:58:55 05/16/18 (0)
    • Think this procedure allowed for higher rated 7581A - FenderLover 01:29:34 05/14/18 (2)
      • Those GE 7581 are the ones i collect. - DAK 09:04:20 05/14/18 (1)
        • I have some 7591A, too. - FenderLover 09:55:55 05/14/18 (0)
• This photographer's portfolio includes some nice vacuum tubes and such... - Jonesy 12:04:18 05/11/18 (6)
  • RE:Sorry, i don't see the merit of taking pics of that kinda stuff - DAK 12:20:10 05/12/18 (0)
  • Thanks, Jonesy-nT - Cleantimestream 18:55:55 05/11/18 (0)
  • Nope...not me. - Byrd69 17:18:21 05/11/18 (3)
    • RE: Nope...not me. - Sondek 08:08:10 05/12/18 (2)
      • Byrd's work is much more artistic - Triode_Kingdom 12:22:00 05/12/18 (1)
        • RE: Byrd's work is much more artistic - Sondek 12:34:42 05/12/18 (0)
• Anyone know why Tung-SOl chose to make no 6922/6DJ8 tubes either in the past or as a remake? - jeffrt 16:40:05 05/10/18 (7)
  • RE: Anyone know why Tung-SOl chose to make no 6922/6DJ8 tubes either in the past or as a remake? - jeffrt 13:36:57 05/11/18 (0)
  • Frame grid tubes - DAK 08:20:52 05/11/18 (0)
  • RE: Anyone know why Tung-SOl chose to make no 6922/6DJ8 tubes either in the past or as a remake? - The Dill 05:42:45 05/11/18 (4)
    • RE: Anyone know why Tung-SOl chose to make no 6922/6DJ8 tubes either in the past or as a remake? - Caucasian Blackplate 07:38:40 05/11/18 (1)
      • RE: Anyone know why Tung-SOl chose to make no 6922/6DJ8 tubes either in the past or as a remake? - Orchardist 10:55:06 05/11/18 (0)
    • RE: Anyone know why Tung-SOl chose to make no 6922/6DJ8 tubes either in the past or as a remake? - jeffrt 05:44:36 05/11/18 (1)
      • RE: Anyone know why Tung-SOl chose to make no 6922/6DJ8 tubes either in the past or as a remake? - Sondek 07:21:59 05/11/18 (0)
• Mu of 6AU6 in Triode? - FlaCharlie 08:58:39 05/10/18 (1)
  • RE: Mu of 6AU6 in Triode? - Eli Duttman 09:18:44 05/10/18 (0)
• Is there a GT version of the 6AG7 or 6P9P? - DAK 13:51:27 05/06/18 (5)
  • 6an5 - thermionic addictions 16:37:43 05/07/18 (1)
    • Thanks but trying to stay with an octal base. cheers! - DAK 21:14:10 05/07/18 (0)
  • Chinese 6P9P? - FenderLover 18:34:47 05/06/18 (2)
    • Not a fan of Chinese tubes - DAK 19:12:27 05/06/18 (1)
      • Prolly been asked of you... - FenderLover 20:26:42 05/07/18 (0)
• GZ34 History - Thermionic27609 16:50:33 05/04/18 (45)
  • RE: GZ34 History - Thermionic27609 19:52:54 05/06/18 (4)
    • Umm.. - FenderLover 23:36:12 05/06/18 (3)
      • RE: Umm.. - Jim McShane 14:11:01 05/07/18 (2)
        • Thanks, Jim! - FenderLover 21:01:47 05/07/18 (1)
          • RE: Thanks, Jim! - Eli Duttman 11:39:14 05/09/18 (0)
  • RE: GZ34 History - TRUFI 16:58:16 05/05/18 (0)
  • It's quite a small rectifier for its capabilities and is / was specified - Timbo in Oz 17:08:44 05/04/18 (38)
    • RE: It's quite a small rectifier for its capabilities and is / was specified - DAK 12:44:09 05/05/18 (0)
    • The big guitar amp manufacturers - FenderLover 18:51:26 05/04/18 (36)
      • I do NOT see how guitar amps are relevant to a hi-fidelity board. - Timbo in Oz 01:51:20 05/06/18 (29)
        • RE: I do NOT see how guitar amps are relevant to a hi-fidelity board. - Todd Krieger 09:56:29 05/08/18 (6)
          • Tube rectifiers do NOT have a sound, they can't have a sound. - Timbo in Oz 12:41:52 05/08/18 (5)
            • F'whoop over rectifiers and f'whoop over accuracy, eh? - Timbo in Oz 14:40:36 05/09/18 (0)
            • RE: Tube rectifiers do NOT have a sound, they can't have a sound. - vinnie2 04:04:36 05/09/18 (3)
              • Vinnie you deliberately build amplifiers that please you. - Timbo in Oz 14:33:47 05/10/18 (2)
                • Is Your "High Fidelity enjoyment" any different than anyone else's ? - Interstage Tranny 10:28:30 05/27/18 (1)
                  • Timbo, if you really believe rectifiers cannot have or provide sound of their own - Timbo in Oz 15:00:12 05/27/18 (0)
        • To the extent that more tube are made and sold for guitar amps.. - Ivan303 07:05:10 05/07/18 (0)
        • And that is why you fail. - Chip647 14:22:18 05/06/18 (0)
        • RE: I do NOT see how guitar amps are relevant to a hi-fidelity board. - Zebra_Finch 05:38:58 05/06/18 (18)
          • No one NEEDS a valve rectifier in a hi-fi amp. - Timbo in Oz 15:33:45 05/06/18 (17)
            • RE: No one NEEDS a valve rectifier in a hi-fi amp. - Zebra_Finch 03:41:27 05/07/18 (16)
              • I told you why) But yyou want to _believe_ that a rectifier that produces DC, IE doesn't amplify audio signals - Timbo in Oz 02:59:38 05/08/18 (0)
              • Sadly, what you say is true... sad because I do not know why-nT - Cleantimestream 14:42:51 05/07/18 (4)
                • You are being told 'why' in this thread, but you won't accept it. - Timbo in Oz 03:11:46 05/08/18 (3)
                  • RE: You are being told 'why' in this thread, but you won't accept it. - Cleantimestream 01:19:05 05/09/18 (2)
                    • BS, I've listened to QUAD 63s here at home for over a year, using several valve amps. - Timbo in Oz 14:42:47 05/09/18 (1)
                      • RE: BS, I've listened to QUAD 63s here at home for over a year, using several valve amps. - Sondek 08:12:17 05/12/18 (0)
              • RE: No one NEEDS a valve rectifier in a hi-fi amp. - Timbo in Oz 14:20:44 05/07/18 (9)
                • +1 - Triode_Kingdom 15:16:41 05/07/18 (8)
                  • Help me understand this - 1973shovel 08:04:07 05/08/18 (7)
                    • Who, me? - Triode_Kingdom 08:41:47 05/08/18 (6)
                      • Yes, you - 1973shovel 05:14:16 05/09/18 (5)
                        • You can't hear DC so they can ONLY be hearing voltage, current and inverse flow limitations. - Timbo in Oz 15:41:49 05/09/18 (4)
                          • RE: You can't hear DC so they can ONLY be hearing voltage, current and inverse flow limitations. - Triode_Kingdom 08:12:00 05/10/18 (3)
                            • RE: "using the best part for the desired result" - 1973shovel 06:48:00 05/11/18 (0)
                            • Thank you - Timbo in Oz 14:31:40 05/10/18 (1)
                              • RE: Thank you - lowther fan 11:37:36 06/04/18 (0)
        • RE: I do NOT see how guitar amps are relevant to a hi-fidelity board. - Uncle Mike 03:11:17 05/06/18 (0)
      • RE: The big guitar amp manufacturers - Thermionic27609 14:30:35 05/05/18 (0)
      • RE: The big guitar amp manufacturers - Nunki 04:29:50 05/05/18 (4)
        • my favorite GZ34 - Zebra_Finch 11:12:40 05/05/18 (0)
        • Beautiful bottles! - FenderLover 04:37:53 05/05/18 (2)
          • RE: Beautiful bottles! - Nunki 08:17:52 05/05/18 (1)
            • Be nice to add to my coke bottle collection - FenderLover 20:48:33 05/05/18 (0)
• Does an Adapter converting a 6SN7 to a 12AU7 make Sense? - Mechans 16:41:44 05/04/18 (6)
  • RE: Does an Adapter converting a 6SN7 to a 12AU7 make Sense? - Snafu 03:29:13 06/02/18 (0)
  • RE: Does an Adapter converting a 6SN7 to a 12AU7 make Sense? - DewDude 10:14:39 05/09/18 (4)
    • RE: Does an Adapter converting a 6SN7 to a 12AU7 make Sense? - d_wotli 05:48:36 05/30/18 (3)
      • RE: Does an Adapter converting a 6SN7 to a 12AU7 make Sense? - Mechans 14:01:43 06/02/18 (2)
        • RE: Does an Adapter converting a 6SN7 to a 12AU7 make Sense? - Snafu 03:10:51 06/05/18 (1)
          • RE: Does an Adapter converting a 6SN7 to a 12AU7 make Sense? - Mechans 19:01:53 06/05/18 (0)
• 813 output transformer specs? - DAK 09:05:15 05/02/18 (16)
  • RE: 813 output transformer specs? - Caucasian Blackplate 09:12:17 05/02/18 (15)
    • Here are some other schemes - DAK 14:56:30 05/04/18 (4)
      • RE: Here are some other schemes - Caucasian Blackplate 15:11:39 05/04/18 (3)
        • Could one use a regular PP output tranny? - DAK 15:35:30 05/04/18 (1)
          • RE: Could one use a regular PP output tranny? - Caucasian Blackplate 18:35:48 05/04/18 (0)
        • Who winds a 50% UL tap? - DAK 15:33:33 05/04/18 (0)
    • I was going pentode mode - DAK 09:45:47 05/02/18 (9)
      • RE: I was going pentode mode - Caucasian Blackplate 10:00:46 05/02/18 (8)
        • RE: I was going pentode mode - DAK 10:32:43 05/02/18 (7)
          • RE: I was going pentode mode - Caucasian Blackplate 10:38:56 05/02/18 (6)
            • I am looking for more schematics - DAK 09:23:09 05/04/18 (5)
              • RE: I am looking for more schematics - Caucasian Blackplate 09:28:36 05/04/18 (4)
                • Tango OPT are crazy expensive. - DAK 10:44:57 05/04/18 (3)
                  • RE: Tango OPT are crazy expensive. - Caucasian Blackplate 13:20:01 05/04/18 (2)
                    • Is worth mentioning Edcor has an offering that is 10 henry per thousand that is 1/3 the price of the Hammond~n - Cleantimestream 01:47:19 05/05/18 (1)
                      • RE: Is worth mentioning Edcor has an offering that is 10 henry per thousand that is 1/3 the price of the Hammond~n - Caucasian Blackplate 08:52:38 05/05/18 (0)
• Mullard EL-84 anyone know the reason why? - Permanent Waves 21:31:29 04/24/18 (10)
  • Only the early versions do that - DAK 10:20:12 04/25/18 (6)
    • RE: Only the early versions do that - Permanent Waves 19:23:24 04/25/18 (5)
      • The funky deposits fooled a lot of people - DAK 21:28:57 04/25/18 (3)
        • RE: The funky deposits fooled a lot of people, I look for it. - Mechans 16:17:05 05/04/18 (1)
          • RE: The funky deposits fooled a lot of people, I look for it. - Nunki 00:22:58 05/21/18 (0)
        • RE: The funky deposits fooled a lot of people - Nunki 09:35:29 04/26/18 (0)
      • RE: Only the early versions do that - BillWojo 20:16:20 04/25/18 (0)
  • RE: Mullard EL-84 anyone know the reason why? - FenderLover 07:28:42 04/25/18 (0)
  • Black burn tubes - merdy 06:25:09 04/25/18 (0)
  • Tobacco stains ~nt~ - Byrd69 06:00:38 04/25/18 (0)
• Does anyone know the manufacturer of this ECC81? - protube@googlemail.com 09:21:43 04/15/18 (6)
  • WAG. - FenderLover 09:55:00 04/15/18 (5)
    • RE: WAG. - heiney9 06:51:42 04/27/18 (2)
      • RE: WAG. - heiney9 09:36:55 04/27/18 (0)
      • RE: WAG. - adrianc 09:23:19 04/27/18 (0)
    • RE: WAG. - protube@googlemail.com 10:44:01 04/15/18 (1)
      • RE: WAG. - protube@googlemail.com 13:09:12 04/15/18 (0)
• An Isolation Transformer - JURB 22:04:29 04/14/18 (21)
  • The properly rated Isolation transformers i have looked at for the main system, - Timbo in Oz 02:31:50 04/19/18 (3)
    • RE: The properly rated Isolation transformers i have looked at for the main system, - JURB 07:54:01 04/19/18 (2)
      • size, but perhaps you missed that? .... - Timbo in Oz 03:45:14 04/20/18 (1)
        • RE: size, but perhaps you missed that? .... - JURB 07:44:59 04/20/18 (0)
  • Looks kinda small... - Victor Khomenko 16:09:17 04/16/18 (0)
  • RE: An Isolation Transformer - Triode_Kingdom 08:07:50 04/15/18 (15)
    • RE: An Isolation Transformer - JURB 16:18:40 04/16/18 (13)
      • RE: An Isolation Transformer - Caucasian Blackplate 07:23:53 04/17/18 (12)
        • RE: An Isolation Transformer - JURB 15:50:25 04/17/18 (8)
          • RE: An Isolation Transformer - Caucasian Blackplate 16:07:33 04/17/18 (7)
            • RE: An Isolation Transformer - JURB 02:12:17 04/18/18 (6)
              • RE: An Isolation Transformer - Victor Khomenko 06:46:01 04/18/18 (5)
                • RE: An Isolation Transformer - JURB 15:20:20 04/18/18 (4)
                  • RE: An Isolation Transformer - JURB 18:06:54 04/18/18 (3)
                    • RE: An Isolation Transformer - JURB 18:30:40 04/18/18 (2)
                      • RE: An Isolation Transformer - JURB 18:32:56 04/18/18 (1)
                        • Your workbench looks almost as neat as mine. nt - Victor Khomenko 06:25:30 04/19/18 (0)
        • That would be my minor concern - Victor Khomenko 08:21:43 04/17/18 (2)
          • RE: That would be my minor concern - Caucasian Blackplate 10:22:02 04/17/18 (1)
            • They usually have taps - Victor Khomenko 15:19:22 04/17/18 (0)
    • RE: An Isolation Transformer - Victor Khomenko 16:14:27 04/16/18 (0)
• tube recommendations - televisionafterdeath 14:45:05 04/14/18 (2)
  • This is a job for Fenderlover....nt - Uncle Mike 15:46:31 04/14/18 (1)
    • 1970s Musicman? - FenderLover 17:51:49 04/14/18 (0)
• Which TUNGSOL 6X4 version is the "best"? - Nunki 03:22:57 04/14/18 (18)
  • RE: Which TUNGSOL 6X4 version is the "best"? - heiney9 06:44:44 04/27/18 (1)
    • RE: Which TUNGSOL 6X4 version is the "best"? - Nunki 10:22:54 04/28/18 (0)
  • RE: Which TUNGSOL 6X4 version is the "best"? - Bill O'Connell 08:49:52 04/25/18 (4)
    • RE: Which TUNGSOL 6X4 version is the "best"? - Nunki 10:11:47 04/25/18 (3)
      • RE: Which TUNGSOL 6X4 version is the "best"? - Bill O'Connell 10:19:35 04/25/18 (2)
        • RE: Which TUNGSOL 6X4 version is the "best"? - Nunki 10:58:07 04/25/18 (1)
          • RE: Which TUNGSOL 6X4 version is the "best"? - Bill O'Connell 09:25:32 04/26/18 (0)
  • RE: Which TUNGSOL 6X4 version is the "best"? - hawaiiguy 22:29:21 04/17/18 (1)
    • RE: Which TUNGSOL 6X4 version is the "best"? - Nunki 02:43:38 04/18/18 (0)
  • RE: Which TUNGSOL 6X4 version is the "best"? - hawaiiguy 22:17:56 04/17/18 (0)
  • RE: Which TUNGSOL 6X4 version is the "best"? - FlaCharlie 05:47:23 04/14/18 (7)
    • I've had good luck with... - FenderLover 07:39:35 04/14/18 (6)
      • RE: I've had good luck with... - Nunki 09:49:09 04/14/18 (5)
        • You should switch to the 6x5 - DAK 11:03:50 04/14/18 (4)
          • RE: You should switch to the 6x5 - Nunki 11:35:01 04/14/18 (3)
            • Bendix 5852. - FenderLover 17:53:59 04/14/18 (2)
              • RE: Bendix 5852. - Nunki 04:05:41 04/15/18 (1)
                • Was responding to your 6X5 question. - FenderLover 06:53:03 04/17/18 (0)
• 6N6P equivalents or substitutes? - jeffrt 17:16:30 04/13/18 (0)
• Telefunken E84L valves - barhead 00:34:33 04/12/18 (2)
  • RE: Telefunken E84L valves - Permanent Waves 21:34:52 04/24/18 (0)
  • RE: Telefunken E84L valves - Nunki 08:51:21 04/12/18 (0)
• Constant power operation - 6AS7_6SN7 10:28:43 04/10/18 (6)
  • RE: Constant power operation - JURB 06:57:35 04/12/18 (1)
    • RE: Constant power operation - 6AS7_6SN7 09:09:18 04/12/18 (0)
  • RE: Constant power operation - Triode_Kingdom 13:06:20 04/11/18 (3)
    • RE: Constant power operation - 6AS7_6SN7 09:17:36 04/12/18 (1)
      • For sake of completeness... - 6AS7_6SN7 02:37:26 04/14/18 (0)
    • RE: Constant power operation - JURB 07:02:14 04/12/18 (0)
• 5670 substitute - Jcris 07:28:08 04/10/18 (4)
  • RE: 5670 substitute - DaveV 15:14:13 04/11/18 (2)
    • RE: 5670 substitute - Jcris 16:21:51 04/11/18 (1)
      • RE: 5670 substitute - DaveV 16:58:18 04/11/18 (0)
  • RE: 5670 substitute - FenderLover 22:52:19 04/10/18 (0)
• Tube Repair ? - Iain42 18:23:47 04/09/18 (13)
  • RE: Tube Repair ? - Ed Sawyer 12:40:49 04/30/18 (0)
  • RE: Tube Repair ? - Audio Pete 07:26:01 04/12/18 (0)
  • RE: Tube Repair ? - Triode_Kingdom 21:25:45 04/09/18 (1)
    • RE: Tube Repair ? - Iain42 06:18:13 04/10/18 (0)
  • RE: Tube Repair ? - Steve O 21:17:10 04/09/18 (7)
    • RTV - Triode_Kingdom 12:47:10 04/11/18 (0)
    • RE: Tube Repair ? - vinnie2 06:46:21 04/10/18 (1)
      • RE: Tube Repair ? - Steve O 07:45:27 04/10/18 (0)
    • RE: Tube Repair ? - Iain42 06:19:40 04/10/18 (1)
      • RE: Tube Repair ? - Steve O 10:02:19 04/10/18 (0)
    • RE: Tube Repair ? - Uncle Mike 03:19:03 04/10/18 (1)
      • RE: Tube Repair ? - Steve O 06:06:28 04/10/18 (0)
  • Really cheap Vanilla ice-cream?... - DeKay 20:17:25 04/09/18 (0)
• 2A3 tube damage - Jcris 11:35:57 04/08/18 (4)
  • RE:Sometime stuff get left behind - DAK 07:48:40 04/09/18 (0)
  • RE: 2A3 tube damage - Sondek 12:50:11 04/08/18 (2)
    • 2A3 tube damage...could be excess arbor glass... - Interstage Tranny 14:40:54 04/08/18 (1)
      • RE: 2A3 tube damage...could be excess arbor glass... - Jcris 09:14:13 04/09/18 (0)
• 6C6 vs 310A in 2A3 amp - whitese 10:20:06 04/07/18 (2)
  • RE: 6C6 vs 310A in 2A3 amp - Cleantimestream 20:01:30 04/07/18 (0)
  • RE: 6C6 vs 310A in 2A3 amp - whitese 10:23:05 04/07/18 (0)
• Great quality control assembling this tube - Byrd69 08:40:24 04/07/18 (6)
  • RE: Great quality control assembling this tube - airtime 20:19:42 04/09/18 (0)
  • RE: Great quality control assembling this tube - Triode_Kingdom 14:33:51 04/07/18 (4)
    • RE: Great quality control assembling this tube - BillWojo 16:57:09 04/07/18 (3)
      • RE: Great quality control assembling this tube - Triode_Kingdom 20:45:56 04/07/18 (2)
        • It's a rare tube. I'm almost rich. - Byrd69 07:43:16 04/08/18 (1)
          • Just follow Old Guys Radiola/Bangy Bang selling style... then retire! (nt) - Jonesy 12:12:27 04/09/18 (0)
• PSA...Old Guy Radiola Ebay ID now bangy bang tubes - Trouser Trout 23:20:24 04/04/18 (19)
  • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - DavidNC 03:53:45 08/08/19 (1)
    • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - Permanent Waves 19:11:28 08/18/19 (0)
  • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - c1ferrari 16:09:07 06/12/18 (0)
  • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - oktubes 05:40:07 06/12/18 (2)
    • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - Chaospromos 09:47:22 07/08/18 (1)
      • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - Permanent Waves 19:43:14 07/16/18 (0)
  • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - oktubes 05:39:01 06/05/18 (10)
    • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - oktubes 05:42:46 06/05/18 (9)
      • Crap - I bought some "GE Five Star" 5670s from Menifee Audio ... - Deke609 17:46:38 07/13/19 (0)
      • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - tewbnewbie 11:28:23 05/16/19 (7)
        • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - Chaospromos 22:29:33 05/23/19 (6)
          • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - tewbnewbie 05:54:43 05/24/19 (5)
            • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - kssauduio230 15:14:43 04/28/20 (0)
            • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - Chaospromos 15:17:21 06/07/19 (2)
              • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - tewbnewbie 19:50:07 07/06/19 (0)
              • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - Permanent Waves 10:09:22 06/11/19 (0)
            • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - Chaospromos 14:17:34 05/24/19 (0)
  • Do you realize how much it cost to put that extra hole in the plate? - DAK 11:12:06 04/06/18 (0)
  • RE: PSA...Old Guy Radiola Ebay ID now bangy bang tubes - Caucasian Blackplate 11:56:40 04/05/18 (0)
• 100 power amplifiers to lift your hat - 6AS7_6SN7 22:27:54 04/02/18 (13)
  • Reading his comments on the LEAK St20 and how to MODIFY one, I find he has used 3 - Timbo in Oz 16:51:51 05/18/18 (0)
  • Kurt is Danish - Joe Roberts 08:25:29 04/04/18 (1)
    • Orangemen! - DAK 08:50:34 04/04/18 (0)
  • RE: 100 power amplifiers to lift your hat - Caucasian Blackplate 09:57:23 04/03/18 (3)
    • Inspite of his opinions the schematics are worth it. - DAK 20:06:40 04/03/18 (1)
      • RE: Inspite of his opinions the schematics are worth it. - Caucasian Blackplate 21:20:20 04/03/18 (0)
    • RE: 100 power amplifiers to lift your hat - Triode_Kingdom 15:45:52 04/03/18 (0)
  • Good reading material but... - DAK 09:43:41 04/03/18 (5)
    • which mod? - Timbo in Oz 15:58:01 04/07/18 (3)
      • He gives many mods to various circuits. - DAK 16:08:58 04/07/18 (2)
        • i want you to tell us all which mod to a PP EL84 amp you carried out and was unhappy with, and why. - Timbo in Oz 00:24:29 04/08/18 (1)
          • RE:I have to check my notebooks, i will let you know - DAK 10:10:54 04/08/18 (0)
    • I agree with his points about the LEAK St20 in the last / third section - Timbo in Oz 20:53:49 04/05/18 (0)
• THANK YOU !! - The Bored 09:57:41 04/02/18 (5)
  • How do we know if our subscription has lapsed? nt - DAK 12:11:42 04/02/18 (4)
    • RE: How do we know if our subscription has lapsed? nt - The Bored 12:20:17 04/02/18 (3)
      • Thank you for checking! 1 question - DAK 13:10:04 04/02/18 (2)
        • RE: Thank you for checking! 1 question - Rod M 17:47:43 04/02/18 (1)
          • RE: Thank you for checking! 1 question - DAK 18:00:26 04/02/18 (0)
• GE5670W 3 mica tubes - Cylontymany 17:24:25 04/01/18 (8)
  • RE: GE5670W 3 mica tubes - Alpha Al 04:25:24 04/02/18 (1)
    • Just as surely as very old 807's looked a lot like 801's._nT - Cleantimestream 06:02:23 04/03/18 (0)
  • RE: GE5670W 3 mica tubes - R Browne 00:18:31 04/02/18 (1)
    • RE: GE5670W 3 mica tubes - decooney 12:43:53 12/24/18 (0)
  • RE: GE5670W 3 mica tubes - Uncle Mike 23:44:45 04/01/18 (0)
  • RE: GE5670W 3 mica tubes - FenderLover 18:00:39 04/01/18 (2)
    • RE: GE5670W 3 mica tubes - Cylontymany 18:06:55 04/01/18 (1)
      • Then, I'd look for... - FenderLover 06:25:30 04/02/18 (0)
• So what's the deal with the JJ-7591S? - Tre' 18:09:35 03/29/18 (8)
  • RE: So what's the deal with the JJ-7591S? - Eli Duttman 03:17:18 03/30/18 (7)
    • RE: So what's the deal with the JJ-7591S? - Audio Pete 07:36:15 04/12/18 (1)
      • RE: So what's the deal with the JJ-7591S? - used-hifi 08:18:10 04/19/18 (0)
    • RE: So what's the deal with the JJ-7591S? - Jim McShane 10:21:26 03/30/18 (3)
      • RE: So what's the deal with the JJ-7591S? - Tre' 07:03:57 03/31/18 (2)
        • RE: So what's the deal with the JJ-7591S? - Eli Duttman 09:52:49 03/31/18 (1)
          • That's what I told my friend. (nt) - Tre' 19:52:24 03/31/18 (0)
    • Thanks - Tre' 07:14:09 03/30/18 (0)
• SE / Lo-eff surprise discovery (longish) - Dingojazz 19:43:07 03/28/18 (0)
• NOS Tung SOL black plate vs smooth grey plate - Sherlock 12:19:20 03/26/18 (9)
  • RE: NOS Tung SOL black plate vs smooth grey plate - Audio Pete 07:32:38 04/12/18 (0)
  • RE: NOS Tung SOL black plate vs smooth grey plate - Ed Sawyer 10:45:41 03/29/18 (0)
  • RE: NOS Tung SOL black plate vs smooth grey plate - DAK 19:56:21 03/28/18 (3)
    • RE: NOS Tung SOL black plate vs smooth grey plate - Audio Pete 07:29:13 04/12/18 (1)
      • kt90 and kt120 - DAK 09:35:45 04/12/18 (0)
    • RE: NOS Tung SOL black plate vs smooth grey plate - Alpha Al 06:36:31 04/01/18 (0)
  • Sell those and get many, many new production sets of tubes for a VTL - Chip647 19:11:16 03/27/18 (1)
    • Or donate them to a good cause. - FenderLover 23:24:00 03/27/18 (0)
  • You have two complete sets of NOS TS 6550 tubes? - FenderLover 12:43:15 03/27/18 (0)
• A pin cleaning tool - Byrd69 08:08:55 03/25/18 (8)
  • RE: A pin cleaning tool - Trouser Trout 22:35:02 03/28/18 (1)
    • Thank you - 1973shovel 06:52:53 03/29/18 (0)
  • Nicely thought out! - Jonesy 11:13:14 03/26/18 (0)
  • RE: A pin cleaning tool - DrN 08:00:52 03/26/18 (1)
    • I use a Dremel as well, but instead of polishing tips... - Jonesy 11:05:19 03/26/18 (0)
  • RE: A pin cleaning tool - Nunki 08:59:12 03/25/18 (2)
    • RE: A pin cleaning tool - ksk 16:23:05 03/27/18 (0)
    • For 9-pin mini tubes, - FenderLover 06:32:50 03/26/18 (0)
• AD1 to 300B Tube Converter/Adapter - soundadvizer 22:40:02 03/23/18 (1)
  • RE: AD1 to 300B Tube Converter/Adapter - bouncy ball 06:50:12 03/24/18 (0)
• 6SN7 to 6922 or 12AT7 adaptor - DannyS 21:38:04 03/22/18 (11)
  • I just go 6SNT(top) 6922(bottom) adapters and - Snafu 04:56:18 04/01/18 (0)
  • RE: 6SN7 to 6922 or 12AT7 adaptor - Caucasian Blackplate 08:26:06 03/23/18 (9)
    • RE: 6SN7 to 6922 or 12AT7 adaptor - DannyS 08:32:13 03/23/18 (8)
      • RE: 6SN7 to 6922 or 12AT7 adaptor - Caucasian Blackplate 08:40:18 03/23/18 (7)
        • RE: 6SN7 to 6922 or 12AT7 adaptor - Sondek 08:43:02 03/23/18 (4)
          • RE: 6SN7 to 6922 or 12AT7 adaptor - Caucasian Blackplate 08:44:33 03/23/18 (3)
            • RE: 6SN7 to 6922 or 12AT7 adaptor - Sondek 08:47:07 03/23/18 (2)
              • RE: 6SN7 to 6922 or 12AT7 adaptor - Caucasian Blackplate 08:49:44 03/23/18 (1)
                • RE: 6SN7 to 6922 or 12AT7 adaptor - DannyS 17:13:49 03/23/18 (0)
        • RE: 6SN7 to 6922 or 12AT7 adaptor - DannyS 08:42:32 03/23/18 (1)
          • RE: 6SN7 to 6922 or 12AT7 adaptor - Caucasian Blackplate 08:43:59 03/23/18 (0)
• 7DJ8 in place of 6DJ8? Overall experiences? - jeffreybehr 14:07:58 03/19/18 (6)
  • RE: 7DJ8 in place of 6DJ8? Overall experiences? - Joe Appierto 06:39:07 03/21/18 (5)
    • RE: 7DJ8 in place of 6DJ8? Overall experiences? - mraudio 08:55:27 03/21/18 (4)
      • TY, mraudio. I already have a quad* of the Matsushita-made... - jeffreybehr 13:02:05 03/21/18 (2)
        • RE: TY, mraudio. I already have a quad* of the Matsushita-made... - Nunki 02:45:33 03/22/18 (1)
          • Yes, they do. I find that they reduce slightly the degree of edginess... - jeffreybehr 11:29:56 03/22/18 (0)
      • RE: 7DJ8 in place of 6DJ8? Overall experiences? - Nunki 11:08:59 03/21/18 (0)
• The never ending search for a good 300b! - peder.lundgren50@telia.com 10:53:19 03/19/18 (10)
  • RE: The never ending search for a good 300b! - Caucasian Blackplate 09:56:37 03/21/18 (1)
    • RE: The never ending search for a good 300b! - hifipaul 15:51:32 03/23/18 (0)
  • Just wait for the new Western Electric coming in September .....nt. - ABliss 06:02:36 03/21/18 (0)
  • Russian; Jim McShane? - Frank E 20:55:37 03/19/18 (0)
  • RE: The never ending search for a good 300b! - Story 11:22:18 03/19/18 (5)
    • RE: The never ending search for a good 300b! - peder.lundgren50@telia.com 22:47:18 03/19/18 (4)
      • RE: The never ending search for a good 300b! - Story 07:02:02 03/20/18 (3)
        • RE: The never ending search for a good 300b! - peder.lundgren50@telia.com 07:09:06 03/20/18 (2)
          • RE: The never ending search for a good 300b! - Story 07:53:40 03/20/18 (1)
            • RE: The never ending search for a good 300b! - Story 03:54:06 03/21/18 (0)
• Connecting a subwoofer to a tube amp - fedocable 16:47:05 03/17/18 (13)
  • RE: Connecting a subwoofer to a tube amp - Zedguy 20:38:24 03/18/18 (2)
    • RE: Connecting a subwoofer to a tube amp - msa 05:27:25 03/19/18 (1)
      • RE: Connecting a subwoofer to a tube amp - Mick Wolfe 09:02:44 03/19/18 (0)
  • RE: Connecting a subwoofer to a tube amp - Tre' 16:52:45 03/17/18 (9)
    • RE: Connecting a subwoofer to a tube amp - Eli Duttman 18:53:27 03/17/18 (5)
      • That is how my setup is arranged - airtime 11:58:05 03/20/18 (0)
      • RE: Connecting a subwoofer to a tube amp - Mick Wolfe 19:57:49 03/17/18 (0)
      • RE: Connecting a subwoofer to a tube amp - fedocable 19:08:08 03/17/18 (2)
        • RE: Connecting a subwoofer to a tube amp - Eli Duttman 19:25:35 03/17/18 (1)
          • RE: Connecting a subwoofer to a tube amp - fedocable 21:39:02 03/17/18 (0)
    • RE: Connecting a subwoofer to a tube amp - fedocable 18:41:10 03/17/18 (2)
      • Yes. (nt) - Tre' 07:30:17 03/18/18 (1)
        • RE: Alright! (tx) - fedocable 10:16:19 03/18/18 (0)
• The Joy of New Tubes - jaydacus 13:05:55 03/17/18 (6)
  • RE: The Joy of New Tubes - classfolkphile 08:07:07 03/19/18 (0)
  • RE: The Joy of New Tubes - akolegov 07:05:38 03/18/18 (3)
    • RE: The Joy of New Tubes - jaydacus 10:21:39 03/18/18 (2)
      • RE: The Joy of New Tubes - Mendel 08:18:34 03/20/18 (0)
      • RE: The Joy of New Tubes - collinslaw@fuse.net 14:58:07 03/18/18 (0)
  • RE: The Joy of New Tubes - collinslaw@fuse.net 05:48:16 03/18/18 (0)
• TJ Full music 300B/n - mhardyman 08:57:55 03/17/18 (0)
• Telefunken 7dj8 - collinslaw@fuse.net 13:14:19 03/15/18 (13)
  • What about use in AI M3a and ARC SP-10 ? - Ross 18:23:52 03/20/18 (0)
  • RE: Telefunken 7dj8 - steve.ott@kctcs.edu 09:07:50 03/16/18 (2)
    • RE: Telefunken 7dj8 - akolegov 23:34:24 03/18/18 (1)
      • RE: Telefunken 7dj8 - steve.ott@kctcs.edu 06:47:01 03/19/18 (0)
  • RE: Telefunken 7dj8 - The Dill 07:20:35 03/16/18 (0)
  • RE: Telefunken 7dj8 - FenderLover 18:10:26 03/15/18 (7)
    • RE: Telefunken 7dj8 - Salectric 07:05:28 03/17/18 (5)
      • RE: Telefunken 7dj8 - bcowen 17:27:48 03/17/18 (4)
        • Just a point of information - Joe Appierto 01:22:41 03/18/18 (2)
          • RE: Just a point of information - collinslaw@fuse.net 05:41:33 03/18/18 (1)
            • The two side by side - Joe Appierto 05:53:23 03/18/18 (0)
        • RE: Telefunken 7dj8 - Salectric 18:10:06 03/17/18 (0)
    • RE: Telefunken 7dj8 - collinslaw@fuse.net 19:03:17 03/15/18 (0)
• Super Tube? - Madlove 18:27:22 03/10/18 (6)
  • RE: Super Tube? - Madlove 18:17:15 03/13/18 (1)
    • RE: Super Tube? - Mendel 14:29:27 03/14/18 (0)
  • Correct me if I am wrong, but.... - Ivan303 08:59:08 03/11/18 (3)
    • RE: Correct me if I am wrong, but.... - Madlove 19:51:46 03/12/18 (2)
      • RE: Correct me if I am wrong, but.... - Mechans 20:17:49 03/12/18 (1)
        • RE: Correct me if I am wrong, but.... - Nunki 10:03:18 03/13/18 (0)
• anyone tried this tube buffer from China? - paco 12:33:34 03/08/18 (26)
  • Both tubes are run in parallel and cathode follower mode - Timbo in Oz 19:18:06 03/14/18 (10)
    • trying one: schematics here - paco 00:42:14 03/16/18 (9)
      • Paco, I gave your irrefutable reasons for not tube rolling - Timbo in Oz 01:27:46 03/16/18 (8)
        • buffers... - PakProtector 12:31:46 03/30/18 (0)
        • I agree but have a question why doesn't it matter? - Mechans 12:16:32 03/18/18 (1)
          • RE: I agree but have a question why doesn't it matter? - Timbo in Oz 13:10:53 03/18/18 (0)
        • RE: Paco, I gave your irrefutable reasons for not tube rolling - paco 01:52:25 03/16/18 (4)
          • RE: Paco, I gave your irrefutable reasons for not tube rolling - Tre' 07:55:05 03/16/18 (3)
            • RE: Paco, I gave your irrefutable reasons for not tube rolling - paco 08:29:56 03/16/18 (2)
              • RE: Paco, I gave your irrefutable reasons for not tube rolling - Tre' 16:12:17 03/16/18 (1)
                • 50 hours... - paco 14:28:20 03/17/18 (0)
  • Yes I have it - bullethead 17:16:33 03/13/18 (5)
    • RE: Yes I have it - paco 02:52:18 03/14/18 (4)
      • RE: Yes I have it - bullethead 06:05:15 03/14/18 (3)
        • RE: Yes I have it - paco 07:50:01 03/14/18 (2)
          • RE: Yes I have it - bullethead 07:54:36 03/14/18 (1)
            • RE: Yes I have it - Nunki 09:34:18 03/14/18 (0)
  • RE: anyone tried this tube buffer from China? - ABliss 08:24:37 03/13/18 (6)
    • Cathode follower buffers? See my post above. There is one potential advantage - Timbo in Oz 19:21:05 03/14/18 (0)
    • RE: anyone tried this tube buffer from China? - paco 09:07:54 03/13/18 (3)
      • See both my posts!? - Timbo in Oz 19:35:14 03/14/18 (0)
      • RE: anyone tried this tube buffer from China? - ABliss 16:56:39 03/13/18 (1)
        • RE: anyone tried this tube buffer from China? - paco 06:00:14 03/14/18 (0)
    • I tried a cheap Chinese Tube buffer, same, Then I bought a $$$$ preamp as a tube buffer. - toothpaste 08:34:16 03/13/18 (0)
  • RE: anyone tried this tube buffer from China? - Stuben 12:09:26 03/09/18 (1)
    • thanks! (nt) - paco 04:03:02 03/12/18 (0)
• Tubes for Unison's Simply Italy - fedocable 08:41:53 03/08/18 (12)
  • RE: Tubes for Unison's Simply Italy - Blackdog 14:18:19 03/08/18 (11)
    • RE: Tubes for Unison's Simply Italy - akolegov 23:45:54 03/08/18 (0)
    • RE: Tubes for Unison's Simply Italy - fedocable 15:24:44 03/08/18 (9)
      • RE: Tubes for Unison's Simply Italy - Blackdog 17:59:26 03/08/18 (8)
        • RE: Tubes for Unison's Simply Italy - fedocable 06:13:12 03/09/18 (7)
          • RE: Tubes for Unison's Simply Italy - Orchardist 10:48:34 03/09/18 (6)
            • RE: Tubes for Unison's Simply Italy - fedocable 11:06:33 03/09/18 (5)
              • RE: Tubes for Unison's Simply Italy - Jim McShane 12:29:49 03/09/18 (4)
                • RE: Tubes for Unison's Simply Italy - fedocable 15:06:57 03/09/18 (3)
                  • RE: Tubes for Unison's Simply Italy - swfarrar 07:32:05 03/11/18 (2)
                    • RE: Tubes for Unison's Simply Italy - fedocable 16:15:27 03/11/18 (1)
                      • RE: Tubes for Unison's Simply Italy - swfarrar 06:06:49 03/12/18 (0)
• TV7 audio tube only chart? - Al Nico 05:50:23 03/06/18 (2)
  • RE: TV7 audio tube only chart? - Mr_Steady 07:06:23 03/07/18 (1)
    • RE: TV7 audio tube only chart? - Al Nico 07:55:07 03/07/18 (0)
• Prima Luna Branded KT88 - mnauta 12:05:04 03/05/18 (5)
  • RE: Prima Luna Branded KT88 - Blackdog 19:14:07 03/05/18 (4)
    • RE: Prima Luna Branded KT88 - Jim McShane 09:06:44 03/06/18 (3)
      • RE: Prima Luna Branded KT88 - Blackdog 14:00:25 03/06/18 (2)
        • RE: Prima Luna Branded KT88 - skriefal 16:43:55 03/06/18 (1)
          • RE: Prima Luna Branded KT88 - Blackdog 13:36:29 03/07/18 (0)

Threads started on or before 4/15/07 are archived Here.
Threads started on or before 3/31/07 are archived Here.
Threads started on or before 3/15/07 are archived Here.
Threads started on or before 2/28/07 are archived Here.
Threads started on or before 2/15/07 are archived Here.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2018, Audio Asylum, all rights reserved ] [ Take5 ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---