Tubes Asylum Questions about tubes and gear that glows. FAQ

For Sale Ads FAQ / News / Events

AudioAsylum Trader Antique Sound Labs Typhoon DT Tube Amp - Antique Sound Labs Typhoon. This is a special unit...

• TV-7D/U Test Set-up for 6528 Tube - rja12@comcast.net 12:07:29 08/20/17 (1)
  • There is no "official" TV7 setup for 6528... - Steve O 19:20:21 08/20/17 (0)
• What tube is this? Advertised as a GZ34 - FenderLover 07:12:01 08/19/17 (6)
  • RE: What tube is this? Advertised as a GZ34 - Audio Pete 09:35:25 08/23/17 (0)
  • RE: What tube is this? Advertised as a GZ34 - Lee of Omaha 17:26:30 08/20/17 (0)
  • Thanks, all! Odd that a seller with 100% feedback - FenderLover 08:23:18 08/20/17 (0)
  • A lot of mixed messages with the pictures. - DAK 22:43:46 08/19/17 (0)
  • RE: What tube is this? Advertised as a GZ34 - skriefal 19:34:46 08/19/17 (1)
    • My first guess was Russian - DAK 22:46:21 08/19/17 (0)
• Ediswan Vacuum Tubes - JazzDude 11:04:07 08/16/17 (3)
  • RE: Ediswan Vacuum Tubes - Jonesy 17:38:39 08/17/17 (2)
    • Thanks Jonsey: Ediswan Vacuum Tubes - JazzDude 09:29:36 08/20/17 (1)
      • RE: Thanks Jonsey: Ediswan Vacuum Tubes - Jonesy 13:09:10 08/20/17 (0)
• integrated amp wanted - fdavis420@att.net 08:14:19 08/16/17 (8)
  • The Parasound integrated should match very well. No tubes though! nt - viridian 06:35:35 08/18/17 (0)
  • Why are you posting on Tubes about an SS amp? Try Amps/preamps or Speakers forums. nt - Rick W 08:55:08 08/16/17 (6)
    • while you're certainly correct - 1973shovel 10:33:26 08/16/17 (3)
      • Sorry, guess I shouldn't have posted that question. But..... - Rick W 09:02:14 08/17/17 (2)
        • RE: Sorry, guess I shouldn't have posted that question. But..... - 1973shovel 15:30:43 08/17/17 (1)
          • No problem. nt - Rick W 16:05:41 08/17/17 (0)
    • RE: Why are you posting on Tubes about an SS amp? Try Amps/preamps or Speakers forums. nt - fdavis420@att.net 09:21:31 08/16/17 (1)
      • You want the Amp/Pre forum... nt - Coner 11:32:53 08/16/17 (0)
• eBay tubes Gold pins? Real? - Permanent Waves 15:15:13 08/12/17 (20)
  • RE: eBay tubes Gold pins? Real? - billvalve 06:35:29 09/17/17 (0)
  • RE: eBay tubes Gold pins? Real? - Audio Pete 12:29:00 08/23/17 (0)
  • We are not bashful, we call him OGR - DAK 16:47:25 08/14/17 (1)
    • RE: We are not bashful, we call him OGR - Trouser Trout 20:51:49 08/14/17 (0)
  • RE: eBay tubes Gold pins? Real? - Tre' 20:12:06 08/12/17 (11)
    • RE: eBay tubes Gold pins? Real? - Caucasian Blackplate 20:45:50 08/12/17 (10)
      • RE: eBay tubes Gold pins? Real? - bcowen 13:41:06 08/13/17 (2)
        • RE: eBay tubes Gold pins? Real? - Permanent Waves 20:23:55 08/13/17 (0)
        • RE: eBay tubes Gold pins? Real? 2nd on BS 7316s - Mechans 19:06:18 08/13/17 (0)
      • He must be an honest guy - airtime 07:33:01 08/13/17 (6)
        • RE: He must be an honest guy - Caucasian Blackplate 07:36:35 08/13/17 (5)
          • RE: He must be an honest guy - Triode_Kingdom 09:51:09 08/13/17 (1)
            • RE: He must be an honest guy - Caucasian Blackplate 10:29:54 08/13/17 (0)
          • Access to "neutral" feedbacks - Rouvin 09:18:48 08/13/17 (0)
          • RE: He must be an honest guy - Ross 09:00:35 08/13/17 (0)
          • RE: He must be an honest guy - airtime 08:43:54 08/13/17 (0)
  • RE: eBay tubes Gold pins? Real? - airtime 16:14:15 08/12/17 (3)
    • RE: eBay tubes Gold pins? Real? - Permanent Waves 18:18:18 08/12/17 (2)
      • RE: eBay tubes Gold pins? Real? - Sondek 09:23:49 08/13/17 (0)
      • RE: eBay tubes Gold pins? Real? - Mechans 19:34:31 08/12/17 (0)
• Good place to buy a PSVANE 12AX7? - mbnx01 10:18:53 08/12/17 (7)
  • RE: Good place to buy a PSVANE 12AX7? - Doktor Brahms 08:45:04 08/14/17 (0)
  • RE: Good place to buy a PSVANE 12AX7? - Mick Wolfe 10:38:05 08/12/17 (5)
    • +2 - Mossback 09:24:10 08/14/17 (0)
    • +1... - Ivan303 17:25:42 08/12/17 (0)
    • RE: Good place to buy a PSVANE 12AX7? - Blackdog 14:33:28 08/12/17 (2)
      • RE: Good place to buy a PSVANE 12AX7? - BillWojo 11:58:47 08/14/17 (1)
        • RE: Good place to buy a PSVANE 12AX7? - Jim McShane 13:45:58 08/15/17 (0)
• New 6H30s malfunction after 300 hours? - sleeper 19:58:43 08/11/17 (13)
  • Jim McShane is the MAN! - sleeper 18:59:10 08/15/17 (1)
    • RE: Jim McShane is the MAN! - Jim McShane 13:02:32 08/16/17 (0)
  • SO - what happened? - airtime 09:15:19 08/15/17 (1)
    • See above (nt) - sleeper 18:49:57 08/15/17 (0)
  • RE: New 6H30s malfunction after 300 hours? - airtime 07:47:07 08/12/17 (5)
    • RE: New 6H30s malfunction after 300 hours? - sleeper 19:35:27 08/12/17 (4)
      • RE: New 6H30s malfunction after 300 hours? - Victor Khomenko 06:31:41 08/17/17 (3)
        • RE: New 6H30s malfunction after 300 hours? - sleeper 18:47:19 08/17/17 (2)
          • RE: New 6H30s malfunction after 300 hours? - Victor Khomenko 11:56:45 08/21/17 (0)
          • RE: New 6H30s malfunction after 300 hours? - Jim McShane 14:45:27 08/18/17 (0)
  • RE: New 6H30s malfunction after 300 hours? - Jim McShane 07:46:11 08/12/17 (1)
    • Thank you, Jim - sleeper 19:28:29 08/12/17 (0)
  • RE: New 6H30s malfunction after 300 hours? - Mechans 21:04:59 08/11/17 (0)
• The Tube Chain - RIQUE 18:36:40 08/08/17 (4)
  • RE: The Tube Chain - SpotcheckBilly12345 10:18:20 08/09/17 (0)
  • RE: The Tube Chain - Sondek 09:06:21 08/09/17 (1)
    • RE: The Tube Chain Second that - Mechans 21:12:58 08/11/17 (0)
  • RE: The Tube Chain - Eli Duttman 08:23:33 08/09/17 (0)
• Tube life considerations. tt verses oxide - amnesiac 05:17:49 08/07/17 (8)
  • RE: Tube life considerations. tt verses oxide - Caucasian Blackplate 10:22:05 08/07/17 (2)
    • RE: Tube life considerations. tt verses oxide - amnesiac 10:12:44 08/08/17 (1)
      • RE: Tube life considerations. tt verses oxide - Caucasian Blackplate 10:54:24 08/08/17 (0)
  • I read an article years ago about running 2a3's as 45"s, or thereabouts... - DeKay 10:18:04 08/07/17 (3)
    • RE: I read an article years ago about running 2a3's as 45"s, or thereabouts... - amnesiac 10:49:23 08/09/17 (2)
      • You can run a 45 or 2A3 on AC filament ... - drummerwill 19:01:36 08/11/17 (1)
        • RE: You can run a 45 or 2A3 on AC filament ... - amnesiac 08:07:32 08/13/17 (0)
  • RE: Tube life considerations. tt verses oxide - JimL 10:14:50 08/07/17 (0)
• AMC tube brand questions - Spantou 14:06:41 08/05/17 (3)
  • RE It is like DELCO, FOMOCO - DAK 18:51:53 08/05/17 (0)
  • If I understand correctly, these are Loctal type... - Ivan303 14:23:47 08/05/17 (1)
    • RE: If I understand correctly, these are Loctal type... - Spantou 06:03:44 08/07/17 (0)
• Reliability of KT150 a problem? - FSonicSmith 09:19:53 08/04/17 (4)
  • RE: Reliability of KT150 a problem? - Jim McShane 10:21:35 08/04/17 (3)
    • RE: Reliability of KT150 a problem? - mondial 22:00:30 08/04/17 (1)
      • Thank You For The Kind Words! (nt) - Jim McShane 13:03:03 08/05/17 (0)
    • RE: Reliability of KT150 a problem? - FSonicSmith 11:18:15 08/04/17 (0)
• Is it possible fir a failing rectifier tube to cause arcing - Zebra_Finch 06:39:54 08/04/17 (4)
  • RE: Is it possible fir a failing rectifier tube to cause arcing - Audio Pete 14:05:44 08/23/17 (0)
  • thanks for responding guys (nt) - Zebra_Finch 16:23:36 08/10/17 (0)
  • RE: Is it possible fir a failing rectifier tube to cause arcing - DewDude 07:45:09 08/10/17 (0)
  • RE: Is it possible fir a failing rectifier tube to cause arcing - Chip647 07:31:31 08/05/17 (0)
• Tubes need "re-burn in"? - pc123v 12:47:32 08/02/17 (11)
  • Thanks for raising this issue. - Timbo in Oz 22:41:16 08/03/17 (3)
    • +1 - 1973shovel 07:46:42 08/04/17 (2)
      • lots and lots of 6BM8s, and a fair few 6GV8s - Timbo in Oz 15:48:00 08/04/17 (1)
        • RE: lots and lots of 6BM8s, and a fair few 6GV8s - pc123v 11:58:22 08/10/17 (0)
  • RE: Tubes need "re-burn in"? - Lee of Omaha 10:03:15 08/03/17 (5)
    • RE: Tubes need "re-burn in"? - Sondek 11:05:42 08/03/17 (4)
      • RE: Tubes need "re-burn in"? - Jim McShane 14:42:10 08/03/17 (3)
        • RE: "It's best to run it a while on a test rig or ??" - 1973shovel 07:52:48 08/04/17 (2)
          • RE: "It's best to run it a while on a test rig or ??" - Jim McShane 08:15:43 08/04/17 (1)
            • RE: "bake used tubes in an oven" - 1973shovel 13:14:40 08/04/17 (0)
  • RE: Tubes need "re-burn in"? - fredtr 14:07:19 08/02/17 (0)
• Ceramic socket needs tensioning or ? - Mechans 21:41:12 07/30/17 (6)
  • RE: Ceramic socket needs tensioning or ? - fredtr 17:59:57 07/31/17 (0)
  • RE: Ceramic socket needs tensioning or ? - connieflyer 17:47:52 07/31/17 (2)
    • RE: Ceramic socket needs tensioning or ? - Mechans 19:05:00 07/31/17 (1)
      • RE: Ceramic socket needs tensioning or ? - connieflyer 12:12:36 08/01/17 (0)
  • RE: Ceramic socket needs tensioning or ? - Triode_Kingdom 08:11:11 07/31/17 (1)
    • RE: Ceramic socket needs tensioning or ? - Caucasian Blackplate 13:47:06 07/31/17 (0)
• Free to a good home - Uncle Mike 14:10:24 07/30/17 (6)
  • RE: Free to a good home - Caucasian Blackplate 16:35:54 07/30/17 (5)
    • RE: Free to a good home - Uncle Mike 17:47:51 07/30/17 (4)
      • RE: Free to a good home - Caucasian Blackplate 18:01:44 07/30/17 (3)
        • RE: Free to a good home - Uncle Mike 18:06:53 07/30/17 (2)
          • RE: Free to a good home - Uncle Mike 18:13:42 07/30/17 (1)
            • RE: Free to a good home - Caucasian Blackplate 19:18:14 07/30/17 (0)
• Western Electric's new digs - Bill Way 08:18:01 07/29/17 (6)
  • RE: Western Electric's new digs - vinnie2 05:26:43 07/30/17 (0)
  • RE: Western Electric's new digs - DrN 15:21:21 07/29/17 (4)
    • RE: Western Electric's new digs - Blackdog 18:43:13 07/29/17 (2)
      • RE: Western Electric's new digs - Ed Sawyer 09:15:26 08/07/17 (0)
      • RE: Western Electric's new digs - airtime 20:00:47 07/29/17 (0)
    • Yep, four years and no new tubes from Charlie.. - Ivan303 18:43:11 07/29/17 (0)
• GZ-34 question - airtime 07:40:49 07/28/17 (11)
  • RE: GZ-34 question - Lee of Omaha 10:06:55 08/03/17 (0)
  • These are all PP amps and one of them is reasonably powerful? - Timbo in Oz 14:51:02 07/28/17 (2)
    • RE: These are all PP amps and one of them is reasonably powerful? - DannyR 09:59:53 07/29/17 (1)
      • I partly agree. - Timbo in Oz 15:04:01 07/29/17 (0)
  • RE: GZ-34 question - fredtr 11:35:06 07/28/17 (0)
  • RE: GZ-34 question - DAK 09:29:23 07/28/17 (2)
    • ? they produce DC and the PSU then should nail any ripple. - Timbo in Oz 14:45:12 07/28/17 (1)
      • Power is always the Objective - PakProtector 03:36:58 07/30/17 (0)
  • RE: GZ-34 question - Sondek 08:24:33 07/28/17 (0)
  • RE: GZ-34 question - mkane77g 07:57:50 07/28/17 (1)
    • RE: GZ-34 question - llwhtt 09:58:14 08/04/17 (0)
• Mil spec Philips-ECG 5AR4 miss-labeled 5V4GA - FenderLover 06:52:20 07/26/17 (6)
  • RE: Mil spec Philips-ECG 5AR4 miss-labeled 5V4GA - Jim McShane 08:15:44 07/26/17 (3)
    • Not quite as tuff as Mullard - DAK 11:13:45 07/26/17 (2)
      • RE: Not quite as tuff as Mullard - Jim McShane 12:57:53 07/26/17 (1)
        • RE: Not quite as tuff as Mullard - DAK 13:47:57 07/26/17 (0)
  • RE: Mil spec Philips-ECG 5AR4 miss-labeled 5V4GA - Steve O 07:09:40 07/26/17 (1)
    • Thanks! Good to know. (n/t) - FenderLover 09:38:24 07/26/17 (0)
• Tube ID - FenderLover 08:35:12 07/24/17 (13)
  • How big is this tube? - DAK 00:21:28 07/26/17 (1)
    • Bigger than GT glass envelope - FenderLover 00:47:10 07/26/17 (0)
  • RE: Tube ID - Caucasian Blackplate 13:52:49 07/25/17 (8)
    • Dunno - FenderLover 17:57:18 07/25/17 (7)
      • That pic shows two anodes arranged vertically in the style of a 6CA4 (nt) - Steve O 18:10:08 07/25/17 (6)
        • What is the octal version of the 6CA4 (EZ81)? - FenderLover 21:05:20 07/25/17 (5)
          • RE: What is the octal version of the 6CA4 (EZ81)? - Steve O 05:51:55 07/26/17 (0)
          • RE: What is the octal version of the 6CA4 (EZ81)? - Eli Duttman 00:58:05 07/26/17 (3)
            • The tube was sold as a "super" 5Y3 - FenderLover 07:11:10 07/26/17 (2)
              • RE: The tube was sold as a "super" 5Y3 - Eli Duttman 09:31:50 07/26/17 (1)
                • Here's another photo. - FenderLover 09:37:16 07/26/17 (0)
  • RE: Tube ID - DAK 22:06:46 07/24/17 (0)
  • RE: Tube ID - DAK 22:03:28 07/24/17 (0)
• Review of replacing a 7199 with a E80CF - airtime 07:35:03 07/22/17 (8)
  • Thanks for your take on this - 1973shovel 08:13:38 07/25/17 (2)
    • RE: Thanks for your take on this - airtime 12:25:29 07/25/17 (1)
      • I appreciate the information - 1973shovel 09:16:56 07/26/17 (0)
  • you did replace both tubes? - Timbo in Oz 15:16:33 07/22/17 (3)
    • But only one tube is bad - airtime 18:30:24 07/22/17 (2)
      • RE: But only one tube is bad - fredtr 07:40:48 07/23/17 (0)
      • Okay so my next point is that the improvements you heard may not be due to the tube type / configuration. - Timbo in Oz 20:15:19 07/22/17 (0)
  • RE: Review of replacing a 7199 with a E80CF - fredtr 08:40:47 07/22/17 (0)
• Tube brand help needed..6U8.... - popsy 19:34:16 07/21/17 (9)
  • RE: Tube brand help needed..6U8.... - Audio Pete 13:42:20 08/29/17 (1)
    • Maybe i will just do "could be" auction on the 'bay then.. - popsy 13:50:25 08/29/17 (0)
  • RE: Tube brand help needed..6U8.... - 2con 13:45:03 07/23/17 (2)
    • RE: Tube brand help needed..6U8.... - 2con 13:47:09 07/23/17 (1)
      • Thanks! - popsy 13:50:20 07/23/17 (0)
  • No ideas on the lst set of two pics? - popsy 18:25:09 07/22/17 (0)
  • RE: Tube brand help needed..6U8.... - kmolles 23:18:17 07/21/17 (1)
    • GE always has USA etched in the glass to..nt - DAK 09:09:22 07/22/17 (0)
  • Grey one could be Westinghouse - DAK 20:03:53 07/21/17 (0)
• Tubes in Space - Triode_Kingdom 08:22:42 07/21/17 (15)
  • RE: Tubes in Space - Audio Pete 09:21:09 08/23/17 (2)
    • RE: Tubes in Space - mhardyman 15:22:02 08/28/17 (1)
      • RE: Tubes in Space - mhardyman 12:55:11 09/06/17 (0)
  • RE: Tubes in Space - Lee of Omaha 05:26:05 07/25/17 (0)
  • Not on my bucket list --NT - jedrider 18:06:10 07/24/17 (0)
  • RE: Sorry TK, there is no sound in a vacuum. - DAK 09:19:20 07/21/17 (9)
    • What about the air in your head & headphones ? Would that work ? - AbeCollins 07:25:59 07/22/17 (2)
      • If you kept your helmet on, there would be sound. nt - DAK 11:45:17 07/22/17 (0)
      • That's what I meant, of course - Triode_Kingdom 11:44:58 07/22/17 (0)
    • Plus it would be hard to breathe nt - Sebrof 12:46:02 07/21/17 (0)
    • Even space is not a perfect vacuum NT - Alpha Al 09:44:38 07/21/17 (0)
    • RE: Sorry TK, there is no sound in a vacuum. - airtime 09:24:01 07/21/17 (3)
      • How could i have remembered that.... - DAK 11:17:57 07/21/17 (0)
      • swimming pools and car races in space? - Byrd69 09:54:37 07/21/17 (1)
        • The conspiracy theorists on youtube are right! - DAK 11:32:28 07/21/17 (0)
• most intresting tube - waterfall 11:05:01 07/20/17 (20)
  • RE: most intresting tube - waterfall 09:00:48 09/18/17 (0)
  • The shape might interest you but it is a very limited tube - Timbo in Oz 05:25:53 08/10/17 (0)
  • RE: most intresting tube - dadbar 07:24:59 07/21/17 (9)
    • RE: most intresting tube - Nunki 05:18:10 07/24/17 (8)
      • RE: most intresting tube - Not Yet There 06:31:47 07/24/17 (6)
        • RE: most intresting tube - Nunki 07:00:58 07/24/17 (5)
          • RE: most intresting tube - waterfall 10:39:53 07/24/17 (4)
            • RE: most intresting tube - cpotl 11:55:01 07/24/17 (3)
              • RE: most intresting tube - PakProtector 18:22:16 07/24/17 (1)
                • RE: most intresting tube - cpotl 01:40:04 07/25/17 (0)
              • RE: most intresting tube - waterfall 14:55:02 07/24/17 (0)
      • RE: most intresting tube - cpotl 05:40:01 07/24/17 (0)
  • RE: most intresting tube - waterfall 06:15:05 07/21/17 (1)
    • RE: most intresting tube - Ed Sawyer 09:18:35 08/07/17 (0)
  • RE: most intresting tube - Chip647 17:16:13 07/20/17 (1)
    • RE: most intresting tube - waterfall 06:06:16 07/21/17 (0)
  • RE: most intresting tube - twystd 12:30:05 07/20/17 (1)
    • RE: most intresting tube - waterfall 06:01:29 07/21/17 (0)
  • RE: most intresting tube - Eli Duttman 11:54:32 07/20/17 (1)
    • RE: most intresting tube - waterfall 05:57:27 07/21/17 (0)
• The Next Audio Amplifier Evolves? - used-hifi 13:45:42 07/19/17 (7)
  • RE: The Next Audio Amplifier Evolves? - fredtr 08:24:00 07/20/17 (0)
  • RE: The Next Audio Amplifier Evolves? - DannyR 21:10:12 07/19/17 (0)
  • RE: The Next Audio Amplifier Evolves? - Caucasian Blackplate 18:26:28 07/19/17 (4)
    • RE: The Next Audio Amplifier Evolves? - Triode_Kingdom 18:54:58 07/19/17 (3)
      • RE: The Next Audio Amplifier Evolves? - used-hifi 19:51:41 07/19/17 (2)
        • RE: The Next Audio Amplifier Evolves? - Triode_Kingdom 20:16:53 07/19/17 (1)
          • RE: The Next Audio Amplifier Evolves? - JKT 22:10:41 07/19/17 (0)
• Vintage Sencore TC162 Mighty Mite VII Tube Tester Question - scruffy_ 13:22:59 07/19/17 (3)
  • RE: Vintage Sencore TC162 Mighty Mite VII Tube Tester Question - Sondek 07:04:35 07/20/17 (0)
  • RE: Vintage Sencore TC162 Mighty Mite VII Tube Tester Question - used-hifi 13:51:56 07/19/17 (1)
    • RE: Vintage Sencore TC162 Mighty Mite VII Tube Tester Question - Triode_Kingdom 18:45:32 07/19/17 (0)
• 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - airtime 08:59:01 07/15/17 (20)
  • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - DannyR 22:42:04 07/19/17 (0)
  • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - PakProtector 18:20:03 07/16/17 (9)
    • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - airtime 19:44:11 07/16/17 (8)
      • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - Triode_Kingdom 05:46:45 07/17/17 (7)
        • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - tubular.well 14:26:43 07/18/17 (0)
        • 7199 - FenderLover 01:38:16 07/18/17 (5)
          • RE: 7199 - airtime 06:39:45 07/18/17 (4)
            • LOL...:) - PakProtector 13:42:37 07/18/17 (3)
              • But it's a dry heat... (nt) - Triode_Kingdom 20:01:33 07/18/17 (2)
                • RE: But it's a dry heat... (nt) - PakProtector 05:19:01 07/19/17 (0)
                • RE: But it's a dry heat... (nt) - airtime 21:00:50 07/18/17 (0)
  • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - fredtr 07:15:09 07/16/17 (2)
    • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - airtime 07:46:07 07/16/17 (1)
      • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - fredtr 08:19:28 07/16/17 (0)
  • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - Eli Duttman 17:08:42 07/15/17 (2)
    • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - airtime 18:10:44 07/15/17 (1)
      • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - Nunki 00:19:03 07/16/17 (0)
  • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - Alpha Al 13:56:08 07/15/17 (1)
    • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - airtime 16:17:42 07/15/17 (0)
  • RE: 6U8 vs 6GH8 vs 6BL8 sub for 7199 needed - DAK 09:44:44 07/15/17 (0)
• 1629 Magic Eye Tube Orientation - Not Yet There 06:03:25 07/05/17 (4)
  • RE: 1629 Magic Eye Tube Orientation - Triode_Kingdom 13:04:00 07/08/17 (2)
    • RE: 1629 Magic Eye Tube Orientation - Not Yet There 07:26:49 07/10/17 (1)
      • RE: 1629 Magic Eye Tube Orientation - Triode_Kingdom 17:44:10 07/10/17 (0)
  • RE: 1629 Magic Eye Tube Orientation - Alpha Al 19:41:09 07/05/17 (0)
• el 34 mullard reissue - 2con 14:09:18 07/04/17 (5)
  • "makes nos power tubes prices really unfair." No, just not required - Chip647 19:10:11 07/04/17 (4)
    • Not sure about that.... - Ross 12:08:33 07/07/17 (2)
      • We were talking about old manufacture tubes versus new ones - Chip647 20:33:39 07/07/17 (1)
        • RE: We were talking about old manufacture tubes versus new ones - 2con 13:36:17 07/08/17 (0)
    • RE: "makes nos power tubes prices really unfair." No, just not required - 2con 03:27:44 07/05/17 (0)
• No output or invalid output on a 74HC595 shift register - makiyang614@gmail.com 20:59:57 07/03/17 (0)
• strange behavior of Belvu and S&H 5751 tubes in my EICO ST84 preamp - DAK 14:36:40 07/03/17 (9)
  • RE: strange behavior of Belvu and S&H 5751 tubes in my EICO ST84 preamp - fredtr 17:12:55 07/04/17 (2)
    • I have not done any voltage measurements with the bad tubes - DAK 02:23:25 07/05/17 (1)
      • RE: I have not done any voltage measurements with the bad tubes - fredtr 05:11:18 07/05/17 (0)
  • RE: strange behavior of Belvu and S&H 5751 tubes in my EICO ST84 preamp - Triode_Kingdom 06:11:11 07/04/17 (1)
    • I was set to do that but changed my mind - DAK 11:22:18 07/04/17 (0)
  • RE: strange behavior of Belvu and S&H 5751 tubes in my EICO ST84 preamp - FenderLover 18:14:18 07/03/17 (3)
    • Even stranger it worked good in a SE EL84 amp - DAK 23:23:33 07/03/17 (2)
      • RE: Even stranger it worked good in a SE EL84 amp - Mechans 11:45:57 07/04/17 (1)
        • Yeah, lots of them - DAK 12:32:19 07/04/17 (0)
• Hickok 6000a test slide switch repair? - fredtr 16:11:55 07/01/17 (11)
  • RE: Hickok 6000a test slide switch repair? - Triode_Kingdom 16:32:53 07/01/17 (10)
    • RE: Hickok 6000a test slide switch repair? - fredtr 16:50:20 07/01/17 (9)
      • RE: Hickok 6000a test slide switch repair? - Triode_Kingdom 18:46:06 07/01/17 (8)
        • RE: Hickok 6000a test slide switch repair? - fredtr 13:05:54 07/02/17 (6)
          • RE: Hickok 6000a test slide switch repair? - Triode_Kingdom 20:46:26 07/02/17 (5)
            • RE: Hickok 6000a test slide switch repair? - fredtr 13:30:52 07/03/17 (4)
              • RE: Hickok 6000a test slide switch repair? - Triode_Kingdom 07:01:08 07/05/17 (3)
                • RE: Hickok 6000a test slide switch repair? - fredtr 08:11:35 07/05/17 (2)
                  • RE: Hickok 6000a test slide switch repair? - Triode_Kingdom 13:07:48 07/05/17 (1)
                    • RE: Hickok 6000a test slide switch repair? - fredtr 15:44:45 07/05/17 (0)
        • RE: Hickok 6000a test slide switch repair? - fredtr 21:00:55 07/01/17 (0)
• Tube amps and interconnects - airtime 09:45:44 07/01/17 (19)
  • RE: Tube amps and interconnects - Audio Pete 09:44:49 08/24/17 (0)
  • RE: Tube amps and interconnects - awesterner 19:44:07 08/09/17 (0)
  • I've used C2G Velocity - jedrider 09:06:26 07/05/17 (0)
  • RE: Tube amps and interconnects - Trouser Trout 11:58:37 07/04/17 (1)
    • RE: Tube amps and interconnects - jmyres 00:29:58 07/25/17 (0)
  • RE: Tube amps and interconnects - DannyR 01:26:24 07/04/17 (2)
    • RE: Tube amps and interconnects - airtime 13:06:15 07/04/17 (1)
      • RE: Tube amps and interconnects - DannyR 17:25:25 07/04/17 (0)
  • RE: Tube amps and interconnects - fredtr 16:07:19 07/01/17 (0)
  • RE: Tube amps and interconnects - Eli Duttman 12:12:15 07/01/17 (8)
    • Thanks Eli and everyone - airtime 19:26:03 07/01/17 (2)
      • RE: Thanks Eli and everyone - Eli Duttman 21:23:23 07/01/17 (1)
        • Thank you for that info - airtime 07:58:08 07/02/17 (0)
    • RE: Tube amps and interconnects - krankkall 14:15:50 07/01/17 (3)
      • RE: Tube amps and interconnects - jaydacus 20:56:34 07/06/17 (0)
      • 3-pin XLR? - PakProtector 03:20:21 07/02/17 (1)
        • RE: 3-pin XLR? - Eli Duttman 07:24:27 07/02/17 (0)
    • RE: Tube amps and interconnects - Jim McShane 13:31:14 07/01/17 (0)
  • RE: Tube amps and interconnects - Chuck Y 10:55:24 07/01/17 (0)
• Follow-up on my matching tube post below - JoshT 16:02:34 06/30/17 (9)
  • RE: Follow-up on my matching tube post below - ksk 07:42:23 07/01/17 (8)
    • Thanks! - JoshT 12:33:31 07/01/17 (7)
      • RE: Thanks! - Sondek 19:06:34 07/01/17 (1)
        • The Mullards were in very snuggly, but . . . - JoshT 12:47:46 07/02/17 (0)
      • If you are experiencing micro phonics with the 12au7(s) used in... - DeKay 13:36:26 07/01/17 (4)
        • RE: If you are experiencing micro phonics with the 12au7(s) used in... - JoshT 12:49:23 07/02/17 (3)
          • And... a PS to my post below... - DeKay 17:14:54 07/02/17 (1)
            • Yeah, it was as you said, a bad tube in the gain stage - JoshT 22:04:05 07/02/17 (0)
          • Yes, your pics are of LP's... - DeKay 17:02:59 07/02/17 (0)
• Is the EC86 half of a 12AT7? - DAK 14:58:30 06/28/17 (10)
  • Anybody use the EC86? - DAK 16:47:57 06/29/17 (5)
    • RE: Anybody use the EC86? - Eli Duttman 00:08:18 06/30/17 (4)
      • RE: Anybody use the EC86? - PakProtector 09:29:26 07/01/17 (1)
        • RE: Anybody use the EC86? - Cleantimestream 06:56:32 07/02/17 (0)
      • RE: Anybody use the EC86? - DAK 08:44:06 06/30/17 (0)
      • RE: Anybody use the EC86? - Nunki 03:34:15 06/30/17 (0)
  • RE: Is the EC86 half of a 12AT7? - Eli Duttman 18:10:32 06/28/17 (3)
    • RE: Is the EC86 half of a 12AT7? - DAK 21:01:42 06/28/17 (2)
      • RE: Is the EC86 half of a 12AT7? - krankkall 15:47:26 06/29/17 (0)
      • RE: Is the EC86 half of a 12AT7? - krankkall 15:46:39 06/29/17 (0)
• Another ear 834p troubleshooting question - pedroboe 20:41:43 06/26/17 (4)
  • RE: Another ear 834p troubleshooting question - Capt. Z 13:23:45 07/09/17 (0)
  • RE: Another ear 834p troubleshooting question - airtime 07:50:28 06/27/17 (0)
  • RE: Another ear 834p troubleshooting question - Palustris 07:30:56 06/27/17 (0)
  • RE: Another ear 834p troubleshooting question - DAK 22:39:49 06/26/17 (0)
• 12au7 to 12bh7 - ianvanniele@gmail.com 11:12:12 06/21/17 (5)
  • RE: 12au7 to 12bh7 - TubeAcolyte 12:34:06 06/21/17 (4)
    • RE: 12au7 to 12bh7 - Jim McShane 15:02:42 06/21/17 (3)
      • RE: 12au7 to 12bh7 - TubeAcolyte 15:35:46 06/21/17 (2)
        • Temperature Scale Conversions - Eli Duttman 16:53:35 06/21/17 (1)
          • or - Ross 18:57:13 06/23/17 (0)
• Just meshin' around - Byrd69 21:51:18 06/20/17 (4)
  • Clever ... just meshin' (nt) - Sondek 14:46:08 06/23/17 (0)
  • RE: Just meshin' around ....... - drummerwill 12:08:02 06/23/17 (2)
    • RE: Just meshin' around ....... - Ed Sawyer 13:15:45 06/23/17 (1)
      • Yes, a 27 globe (nt) - Byrd69 14:41:34 06/25/17 (0)
• Amperex CV492 - acfix.bob 21:31:03 06/20/17 (4)
  • RE: Amperex CV492 - Palustris 08:57:07 06/21/17 (2)
    • RE: Amperex CV492, I read that as well... - Mechans 14:11:16 06/26/17 (1)
      • RE: Amperex CV492, I read that as well... - Palustris 15:00:54 06/26/17 (0)
  • RE: Amperex CV492 - FenderLover 06:44:59 06/21/17 (0)
• 6SN7GT Hey Amphead! - waterfall 09:46:44 06/16/17 (19)
  • AFAIK, Mullard made ECC33, not 6SN7GT - FenderLover 22:16:58 06/19/17 (6)
    • RE: AFAIK, Mullard made ECC33, not 6SN7GT What about ECC32s - Mechans 14:08:04 06/26/17 (5)
      • RE: AFAIK, Mullard made ECC33, not 6SN7GT What about ECC32s - connieflyer 13:44:54 06/29/17 (4)
        • RE: AFAIK, Mullard made ECC33, not 6SN7GT What about ECC32s - waterfall 18:07:08 06/30/17 (0)
        • RE: AFAIK, Mullard made ECC33, not 6SN7GT What about ECC32s - connieflyer 13:49:48 06/29/17 (2)
          • RE: AFAIK, Mullard made ECC33, not 6SN7GT What about ECC32s - connieflyer 13:53:02 06/29/17 (1)
            • RE: AFAIK, Mullard made ECC33, not 6SN7GT What about ECC32s - connieflyer 13:54:39 06/29/17 (0)
  • RE: 6SN7GT Hey Amphead! - waterfall 11:19:54 06/19/17 (2)
    • RE: 6SN7GT Hey Amphead! - connieflyer 12:43:24 06/24/17 (1)
      • RE: 6SN7GT Hey Amphead! - waterfall 18:39:09 06/24/17 (0)
  • RE: 6SN7GT Hey Amphead! - SETdude 11:27:41 06/18/17 (0)
  • RE: 6SN7GT Hey Amphead! - waterfall 10:06:21 06/17/17 (3)
    • RE: 6SN7GT Hey Amphead! - Tre' 07:36:23 06/18/17 (0)
    • Tre' won't know this is a response to his comment . . . - JoshT 06:46:31 06/18/17 (1)
      • RE: Tre' won't know this is a response to his comment . . . - waterfall 06:01:21 06/20/17 (0)
  • Shuguang 6N8P? (n/t) - FenderLover 18:26:24 06/16/17 (0)
  • RE: 6SN7GT Hey Amphead! - Tre' 12:02:55 06/16/17 (0)
  • RE: 6SN7GT Hey Amphead! - waterfall 09:47:56 06/16/17 (1)
    • RE: 6SN7GT Hey Amphead! - DAK 11:41:33 06/16/17 (0)
• Hope someone can help clear something up for me . . . - JoshT 22:39:39 06/14/17 (18)
  • RE: Hope someone can help clear something up for me . . . - Tre' 14:15:32 06/16/17 (0)
  • RE: Hope someone can help clear something up for me . . . - DAK 13:40:15 06/16/17 (0)
  • THANKS Gentlemen, I'll take a look at the tubes themselves . . . - JoshT 07:48:56 06/15/17 (4)
    • RE: THANKS Gentlemen, I'll take a look at the tubes themselves . . . - Sondek 08:01:11 06/15/17 (1)
      • Excellent. Thanks! nt - JoshT 08:07:31 06/15/17 (0)
    • RE: THANKS Gentlemen, I'll take a look at the tubes themselves . . . - airtime 08:01:02 06/15/17 (1)
      • Ah, thanks for the reminder on tube rings, etc. - JoshT 08:07:05 06/15/17 (0)
  • RE: Hope someone can help clear something up for me . . . - Sondek 06:48:40 06/15/17 (0)
  • RE: Hope someone can help clear something up for me . . . - Byrd69 06:41:18 06/15/17 (7)
    • Why do you even say that? - JoshT 07:42:41 06/15/17 (6)
      • Why? - Byrd69 09:03:15 06/15/17 (5)
        • RE: Why? - Jim McShane 11:33:19 06/15/17 (1)
          • RE: Why? - Triode_Kingdom 13:27:39 06/15/17 (0)
        • OK, fair enough . . . - JoshT 09:15:07 06/15/17 (2)
          • RE: OK, fair enough . . . - Triode_Kingdom 13:22:17 06/15/17 (1)
            • RE: OK, fair enough . . . - Trouser Trout 19:30:15 06/15/17 (0)
  • RE: Hope someone can help clear something up for me . . . - PeterI 06:37:29 06/15/17 (0)
  • RE: Hope someone can help clear something up for me . . . - FenderLover 01:02:55 06/15/17 (0)
• Does anyone know these tubes? - protube@googlemail.com 05:32:45 06/14/17 (15)
  • RE: Does anyone know these tubes? - DAK 08:57:25 06/14/17 (2)
    • RE: Does anyone know these tubes? - Snafu 12:25:18 06/14/17 (1)
      • RE: Does anyone know these tubes? - protube@googlemail.com 02:51:54 06/16/17 (0)
  • RE: Does anyone know these tubes? - protube@googlemail.com 05:36:00 06/14/17 (11)
    • RE: Does anyone know these tubes? - protube@googlemail.com 05:37:05 06/14/17 (10)
      • RE: Does anyone know these tubes? - protube@googlemail.com 05:37:50 06/14/17 (9)
        • RE: Does anyone know these tubes? - protube@googlemail.com 05:38:17 06/14/17 (8)
          • RE: Does anyone know these tubes? - protube@googlemail.com 05:38:36 06/14/17 (7)
            • RE: Does anyone know these tubes? - protube@googlemail.com 05:39:23 06/14/17 (6)
              • RE: Does anyone know these tubes? - protube@googlemail.com 05:39:58 06/14/17 (5)
                • RE: Does anyone know these tubes? - protube@googlemail.com 05:40:17 06/14/17 (4)
                  • RE: Does anyone know these tubes? - protube@googlemail.com 05:40:36 06/14/17 (3)
                    • RE: Does anyone know these tubes? - protube@googlemail.com 05:40:59 06/14/17 (2)
                      • RE: Does anyone know these tubes? - protube@googlemail.com 05:41:17 06/14/17 (1)
                        • RE: Does anyone know these tubes? - protube@googlemail.com 05:41:42 06/14/17 (0)
• my tube comparisons - waterfall 19:15:58 06/12/17 (13)
  • RE: my tube comparisons - waterfall 13:50:38 06/19/17 (0)
  • RE: my tube comparisons - waterfall 05:27:13 06/14/17 (0)
  • RE: my tube comparisons - DAK 16:15:50 06/13/17 (0)
  • You've left out DHTs like 26, 01A, 10Y, 4P1L..... - andy evans 00:40:36 06/13/17 (1)
    • RE: You've left out DHTs like 26, 01A, 10Y, 4P1L..... - PakProtector 13:45:47 07/05/17 (0)
  • Need to know your equipment - FenderLover 20:04:14 06/12/17 (7)
    • RE: Need to know your equipment - waterfall 05:29:52 06/13/17 (1)
      • RE: Need to know your equipment - Mechans 19:46:57 06/13/17 (0)
    • RE: Need to know your equipment - waterfall 03:08:46 06/13/17 (4)
      • RE: Need to know your equipment - waterfall 09:14:23 06/13/17 (2)
        • RE: Need to know your equipment - Mechans 16:01:43 06/14/17 (1)
          • RE: Need to know your equipment - waterfall 06:52:25 06/15/17 (0)
      • RE: Need to know your equipment - FenderLover 06:47:46 06/13/17 (0)
• Will this work? Switching from 6.3 to 12.6 volts - DAK 16:52:21 06/11/17 (20)
  • RE: Will this work? Switching from 6.3 to 12.6 volts - Eli Duttman 00:01:16 06/12/17 (5)
    • Doesn't the Dynaco PAS use a voltage doubler for rectifying the filaments? - DAK 12:00:41 06/12/17 (2)
      • RE: Doesn't the Dynaco PAS use a voltage doubler for rectifying the filaments? - Eli Duttman 16:32:10 06/12/17 (1)
        • RE: Doesn't the Dynaco PAS use a voltage doubler for rectifying the filaments? - DAK 16:52:27 06/12/17 (0)
    • RE: Will this work? Switching from 6.3 to 12.6 volts - DAK 02:26:56 06/12/17 (1)
      • RE: Will this work? Switching from 6.3 to 12.6 volts - Eli Duttman 03:52:23 06/12/17 (0)
  • RE: Will this work? Switching from 6.3 to 12.6 volts - Triode_Kingdom 23:21:30 06/11/17 (5)
    • Sorry, i was mistaken about the single 6.3vac tap - DAK 02:34:30 06/12/17 (4)
      • Not according to the Eico schematic - Triode_Kingdom 11:11:51 06/12/17 (3)
        • RE: Not according to the Eico schematic - DAK 11:49:35 06/12/17 (2)
          • RE: Not according to the Eico schematic - Triode_Kingdom 13:10:47 06/12/17 (1)
            • RE: Not according to the Eico schematic - DAK 14:55:00 06/12/17 (0)
  • Voltage doubler circuits - FenderLover 19:21:16 06/11/17 (7)
    • RE: Voltage doubler circuits - DAK 02:31:04 06/12/17 (5)
      • If you already have 12.6 VDC.. - FenderLover 07:20:24 06/12/17 (4)
        • RE:I am trying to get 12.6v - DAK 09:32:16 06/12/17 (3)
          • RE:I am trying to get 12.6v - FenderLover 18:12:20 06/12/17 (2)
            • RE:I am trying to get 12.6v - DAK 18:17:45 06/12/17 (1)
              • Yeah, 12.6VAC transformer is prolly best solution. (n/t) - FenderLover 20:03:05 06/12/17 (0)
    • RE: Voltage doubler circuits - Eli Duttman 00:07:21 06/12/17 (0)
• Do tube preamps add or take away dynamics - airtime 14:31:42 06/08/17 (32)
  • With a digital source, why preamps at all? - andy evans 23:51:35 06/11/17 (9)
    • That's exactly what I thought years ago - E-Stat 10:38:52 06/12/17 (0)
    • RE: With a digital source, why preamps at all? - Eli Duttman 00:29:08 06/12/17 (7)
      • RE: With a digital source, why preamps at all? - 91derlust 01:04:44 06/12/17 (6)
        • RE: With a digital source, why preamps at all? - Eli Duttman 04:13:50 06/12/17 (5)
          • Follow-Up Question - Jim Hodgson 13:30:54 06/13/17 (2)
            • RE: Follow-Up Question - Eli Duttman 15:46:29 06/13/17 (1)
              • RE: Follow-Up Question - Tubegroover 08:55:11 06/14/17 (0)
          • RE: With a digital source, why preamps at all? - airtime 07:53:28 06/12/17 (0)
          • RE: With a digital source, why preamps at all? - andy evans 07:25:35 06/12/17 (0)
  • Nelson's DIY projects are all worthy, but - E-Stat 20:27:31 06/11/17 (2)
    • LOL - "the Xs series has drawn a line in the sand" - Triode_Kingdom 23:29:34 06/11/17 (1)
      • Surely it is well known - E-Stat 10:33:24 06/12/17 (0)
  • RE: Do tube preamps add or take away dynamics - Mechans 09:01:52 06/11/17 (0)
  • Taking away dynamics??????? - Timbo in Oz 02:28:33 06/11/17 (0)
  • RE: Do tube preamps add or take away dynamics - DannyR 22:45:23 06/10/17 (0)
  • Systems - These things are parts of systems - Chip647 06:19:35 06/10/17 (0)
  • RE: Do tube preamps add or take away dynamics - Thermionic27609 17:23:25 06/09/17 (0)
  • RE: Do tube preamps add or take away dynamics - 2con 13:44:12 06/09/17 (1)
    • RE: Do tube preamps add or take away dynamics - Cleantimestream 01:50:01 06/10/17 (0)
  • RE: Do tube preamps add or take away dynamics - waterfall 05:34:38 06/09/17 (4)
    • That had a tube output stage, didn't it? - Rick W 08:18:33 06/09/17 (3)
      • Cary 303/300 - Uncle Mike 12:12:37 06/09/17 (0)
      • RE: That had a tube output stage, didn't it? - waterfall 11:48:50 06/09/17 (1)
        • Seems I was wrong. No tubes. Thanks for the link. nt - Rick W 12:58:32 06/09/17 (0)
  • RE: Do tube preamps add or take away dynamics - Eli Duttman 22:24:56 06/08/17 (3)
    • RE: Do tube preamps add or take away dynamics - PakProtector 17:53:34 06/12/17 (0)
    • Thank you - airtime 07:27:47 06/10/17 (0)
    • Well, Eli ... that is 'the best' answer... for me {smile}~nT - Cleantimestream 01:47:07 06/10/17 (0)
  • RE: Do tube preamps add or take away dynamics - hahax@verizon.net 19:31:36 06/08/17 (2)
    • RE: Do tube preamps add or take away dynamics - airtime 19:49:07 06/08/17 (1)
      • RE: Do tube preamps add or take away dynamics - Mechans 15:37:06 06/13/17 (0)
• Hot spots on 6V6 plates - Alpha Al 10:19:40 06/08/17 (20)
  • RE: Hot spots on 6V6 plates - awesterner 02:08:11 08/28/17 (0)
  • Try a 5r4 rectifier - DAK 13:53:08 06/08/17 (2)
    • RE: Try a 5r4 rectifier - Alpha Al 15:05:52 06/08/17 (1)
      • RE: On the other hand.... - DAK 22:08:47 06/08/17 (0)
  • RE: Hot spots on 6V6 plates - 6bq5 13:28:25 06/08/17 (0)
  • RE: 450v plate and screen? - DAK 10:55:09 06/08/17 (14)
    • RE: 450v plate and screen? - Alpha Al 11:25:37 06/08/17 (13)
      • RE: 450v plate and screen? - Audio Pete 14:54:15 08/23/17 (0)
      • RE: 450v plate and screen? - Audio Pete 14:49:56 08/23/17 (0)
      • RE: 450v plate and screen? - kmolles 15:23:28 06/08/17 (0)
      • RE: 450v plate and screen? - Jim McShane 13:39:35 06/08/17 (9)
        • RE: 450v plate and screen? - Alpha Al 13:56:49 06/08/17 (8)
          • RE: 450v plate and screen? - Tre' 18:49:07 06/08/17 (3)
            • RE: 450v plate and screen? - Alpha Al 07:57:11 06/09/17 (2)
              • RE: 450v plate and screen? - Tre' 09:35:31 06/09/17 (1)
                • RE: 450v plate and screen? - FenderLover 07:27:23 06/12/17 (0)
          • RE: 450v plate and screen? - Jim McShane 14:21:23 06/08/17 (3)
            • New development - Alpha Al 15:11:00 06/08/17 (2)
              • RE: New development - Jim McShane 16:27:54 06/08/17 (1)
                • Screen resistors - FenderLover 17:53:11 06/08/17 (0)
• Genalex Gold Lion Made in China - Lman 09:55:24 06/05/17 (5)
  • RE: Genalex Gold Lion Made in China - Jim McShane 10:16:41 06/05/17 (3)
    • Chinese GL 12AX7 - FenderLover 20:37:58 06/05/17 (2)
      • RE: Chinese GL 12AX7 - Jim McShane 13:28:06 06/06/17 (1)
        • +1. Yes, I agree with Jim. The Russian GL has a warm signature IME. - Mick Wolfe 09:00:05 06/07/17 (0)
  • RE: Genalex Gold Lion Made in China - TubeAcolyte 10:14:35 06/05/17 (0)
• Best Mullard 12AU7? - aarocks 19:39:52 06/02/17 (3)
  • RE: Best Mullard 12AU7? - SETdude 21:12:31 06/09/17 (0)
  • RE: Best Mullard 12AU7? - Sherlock 22:17:49 06/03/17 (1)
    • RE: Best Mullard 12AU7? 2nd this suggestion - Mechans 19:24:21 06/13/17 (0)
• How to determine when a re-tubing is required - 1973shovel 09:58:19 06/02/17 (30)
  • RE: How to determine when a re-tubing is required - Bill Way 09:53:05 09/14/17 (0)
  • RE: How to determine when a re-tubing is required - Permanent Waves 18:37:43 09/13/17 (0)
  • RE: How to determine when a re-tubing is required - Audio Pete 12:55:12 08/25/17 (0)
  • RE: How to determine when a re-tubing is required - Mechans 19:16:25 06/13/17 (0)
  • RE: How to determine when a re-tubing is required - vinnie2 04:06:43 06/04/17 (1)
    • Indeed they did, Vinnie! (nt) - 1973shovel 09:37:25 06/04/17 (0)
  • They are some Chinese tubes with about 2 hours. - DAK 17:48:21 06/02/17 (1)
    • Russian tubes... - R Browne 22:03:31 06/03/17 (0)
  • RE: My set sounds like Alvin and the Chipmunks - DAK 12:19:38 06/02/17 (21)
    • RE: My set sounds like Alvin and the Chipmunks - Cpwill 19:01:51 06/02/17 (19)
      • RE: I like moose and squirrel! - DAK 22:21:17 06/03/17 (18)
        • RE: I like moose and squirrel! - Mechans 19:06:10 06/13/17 (0)
        • RE: I like moose and squirrel! - pictureguy 00:32:30 06/04/17 (16)
          • RE: I like moose and squirrel! - airtime 07:07:07 06/04/17 (1)
            • RE: I like moose and squirrel! - pictureguy 10:42:09 06/04/17 (0)
          • My point exactly - DAK 00:57:10 06/04/17 (13)
            • RE: My point exactly - pictureguy 10:39:09 06/04/17 (6)
              • I am not being serious just some lighthearted ruminations. - DAK 11:00:02 06/04/17 (5)
                • RE: I am not being serious just some lighthearted ruminations. - pictureguy 12:25:58 06/04/17 (4)
                  • Now, you are getting serious. - DAK 13:22:10 06/04/17 (1)
                    • RE: Now, you are getting serious. - pictureguy 14:08:47 06/04/17 (0)
                  • RE: I am not being serious just some lighthearted ruminations. - airtime 12:59:38 06/04/17 (1)
                    • RE: I am not being serious just some lighthearted ruminations. - pictureguy 13:24:29 06/04/17 (0)
            • If Boris and Natasha helped instill Soviet fear in me as a child - 1973shovel 09:35:37 06/04/17 (4)
              • RE: You and the trumpster! - DAK 10:32:12 06/04/17 (1)
                • I thought her mustache tickled too much (nt) - 1973shovel 07:58:53 06/05/17 (0)
              • Oh thank you - airtime 10:14:14 06/04/17 (1)
                • You're very welcome (nt) - 1973shovel 07:59:44 06/05/17 (0)
            • RE: My point exactly - PakProtector 03:44:53 06/04/17 (0)
    • RE: My set sounds like Alvin and the Chipmunks - 6bq5 16:50:11 06/02/17 (0)
• Not exactly a tube question (Schiit Lisst) - Snafu 02:23:30 05/30/17 (3)
  • Best way to screw up my amp with transistors? - Triode_Kingdom 09:35:12 06/03/17 (0)
  • Just out of curiosity... - Chip647 14:19:26 06/01/17 (1)
    • RE: Just out of curiosity... - Snafu 00:58:13 06/03/17 (0)
• Vintage Telefunken ecc83+ediswan ecc82 worth? - birkevee@gmail.com 01:37:25 05/30/17 (9)
  • two dolla......nt - Uncle Mike 09:04:27 05/30/17 (1)
    • RE: two dolla......nt - airtime 07:10:10 05/31/17 (0)
  • Thinly-Disguised "FOR SALE" Spam - Triode_Kingdom 08:29:53 05/30/17 (0)
  • RE: Vintage Telefunken ecc83+ediswan ecc82 worth? - Byrd69 07:26:46 05/30/17 (1)
    • RE: Vintage Telefunken ecc83+ediswan ecc82 worth? - birkevee@gmail.com 08:37:00 05/30/17 (0)
  • RE: Vintage Telefunken ecc83+ediswan ecc82 worth? - FenderLover 06:32:18 05/30/17 (3)
    • RE: Vintage Telefunken ecc83+ediswan ecc82 worth? - birkevee@gmail.com 06:35:40 05/30/17 (2)
      • Measure - jusbe 07:05:33 05/30/17 (1)
        • Oops! Another reading comprehension boo-boo. - FenderLover 07:48:57 05/30/17 (0)
• Speaking of rugged 6922 types - airtime 11:59:17 05/29/17 (7)
  • RE: Speaking of rugged 6922 types - The Dill 21:16:09 06/06/17 (1)
    • RE: Speaking of rugged 6922 types - Snafu 03:38:23 06/09/17 (0)
  • RE: Speaking of rugged 6922 types - Snafu 09:27:19 06/06/17 (0)
  • RE: Speaking of rugged 6922 types - Tre' 11:21:33 05/30/17 (2)
    • RE: Speaking of rugged 6922 types - 2con 13:37:10 05/30/17 (1)
      • RE: Speaking of rugged 6922 types - DannyR 14:02:51 05/30/17 (0)
  • RE: Speaking of rugged 6922 types - Sondek 11:09:25 05/30/17 (0)

Threads started on or before 4/15/07 are archived Here.
Threads started on or before 3/31/07 are archived Here.
Threads started on or before 3/15/07 are archived Here.
Threads started on or before 2/28/07 are archived Here.
Threads started on or before 2/15/07 are archived Here.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2017, Audio Asylum, all rights reserved ] [ Take5 ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---