In Reply to: Re: Subwoofers in phase or out? a quick question posted by Schu on March 28, 2007 at 12:06:23:
thanks Schu,
I think you are onto something.... the lowest x-over point for these subs is 50HZ. i'm pretty sure my floorstanding thiels go lower, but they are just sitting on carpet & don't seem to produce the really low freq's this way.i've been trying to figure out if there's cancellation somewhere, but to my ears the entire presentation is spot on.
i don't have a way to measure it, but do know a guy with an RTA & mics if worse comes to worse. maybe i should just get a rat shack db meter & download a test CD?
well, since i can't lower the x-over frequency more, i won't lose sleep over it.
In summation, changing the Phase changes everything. More deep bass at 0 degrees but way more 3-D wildness at 180 degrees. At 0 degrees, the subs shake the floor a bit. At 180 degrees the cabinets barely vibe even though the driver acts the same, same exceursion.
to some this may seem like a preference issue, but its not.
My room is treated, and to my surprise the budget acoustic kit does not seem to be overpowered by the subs whatsoever. i don't listen at high spl's though, which is probably the real test.
neither sub is turned up more than 30% of volume. With the phase in either position, turning up past that point sounds bad, doesn't integrate as well.
RBG, please chime in if you are available...
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Subwoofers in phase or out? a quick question - mattcecil1@yahoo.com 12:26:28 03/28/07 (1)
- Re: Subwoofers in phase or out? a quick question - Schu 13:39:59 03/28/07 (0)