|
Speaker Asylum General speaker questions for audio and home theater. |
Register / Login
|
In Reply to: Upgrades for Linbrook Signature Monitors posted by Audiopath49 on February 26, 2007 at 21:00:27:
I would replace the DH Labs wire with the Cardas wire which Ty has in stock. Can also use some other type of higher quality internal hook-up wire. Cryo Vampire CCC in 12 or 14g is good.I would also replace the following in the crossover (like for like values)
1. Replace all Eagle resistors with Mills. Six resistors total for a pair of speakers.
2. Replace the Bennic electrolytic caps in the woofer crossover with the best film caps you can afford. Sonicap Gen I make a good choice. If money is an issue, could go with Solen.
3. A Mundorf silver & oil (.1uf) makes a nice bypass cap for the Hovland cap in the tweeter crossover.I did all the above to my Tyler Acoustics HT speakers and the sound quality improvement was incredible.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Upgrades for Linbrook Signature Monitors - StevenACNJ 05:26:15 03/04/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
