In Reply to: cardas 2x21 - anyone knows it? posted by gordan on September 16, 2006 at 14:17:13:
I'm using this cable as interconnect between my pre & power amp. and it's a great cable actually although it’s intended for internal wiring originally, clear bass but not heavy and clear and sweet treble.
I bought 2 meters in Greece (a few years ago) unterminated at about 60 euro which means that your prise is ok for Europe but as I found out recently this cable sells in the US for 3.5$ per foot (the actual recommended retal is 6.9$) which means about 45 euro for 4 meters (+ shipping which should be less than 10$ with a letterpost).
Check here http://www.partsconnexion.com/catalog/wire.html in the interconnect tab from the selector in the lower part of the screen (Cardas 2x21.5).
Terminating this cable needs a little effort but if you have a soldering iron I think you will not have a problem, you just need to melt the enamel with the solder.
Also be careful when you remove the Teflon which is covering the copper conductors because this is a litz construction and the individual clones can only get the signal from the soldering pointAlex
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: cardas 2x21 - anyone knows it? - Alex_E 02:56:46 09/17/06 (0)