In Reply to: Tweeter update posted by Tadlo on December 16, 2011 at 07:26:44:
If you need 2 dB and don't want to change the crossover frequency, consider using a 2 resistor L-pad. 2 ohms in series, and 20 ohms in parallel with the tweeter will give about 2 dB of attenuation, and keep the impedance more or less constant. Just be sure the parallel resistor is closest to the tweeter, so the 2 ohm is in series with both tweeter and 20 ohm.
Jerry
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Tweeter update - Bold Eagle 15:16:00 12/16/11 (6)
- RE: Tweeter update - Tadlo 16:07:32 12/16/11 (2)
- RE: Tweeter update - Bold Eagle 17:46:55 12/16/11 (1)
- RE: Tweeter update - Tadlo 21:58:09 12/17/11 (0)
- RE: Tweeter update - Tadlo 15:30:42 12/16/11 (2)
- RE: Tweeter update - Tom Bavis 17:38:52 12/16/11 (1)
- RE: Tweeter update - Tadlo 21:55:27 12/17/11 (0)