|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
|
|
Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
In Reply to: Paeng Projects, but no E55L posted by korneluk on April 19, 2003 at 16:43:45:
Hello Jose ,
go to devices , then to high u Tubes and then open part 1 on the paeng website . There is a list of possible tubes for this amps like EC 8020 , 3A167M , WE 437 and E55L in pseudotriode mode . I have done this with 60 ohm cathode resistor bypassed with 1000 uF and 140 volt plate voltage , then I have 55 mA current . I made this with a regulated power supply and it sounds amazing . The most simple "power" amp , I ´ve ever built . No hiss , no hum and no oszillation , I have used grid stoppers , ferrite beads and very short wires .
Regards , AlexK.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Paeng Projects, but no E55L - AlexK 17:15:07 04/19/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]