Home
AudioAsylum Trader
Amp/Preamp Asylum: REVIEW: Convergent Audio Technology SL-1 Signature Amplifier (Tube) by 90493m

Looking for a new Amp or Preamp? If you're after tubes, post over here.

For Sale Ads

FAQ / News / Events

 

REVIEW: Convergent Audio Technology SL-1 Signature Amplifier (Tube)

65.124.37.12


[ Follow Ups ] Thread:  [ Display   All   Email ] [ Amp/Preamp Asylum ]
[ Alert Moderator ]

Model: SL-1 Signature
Category: Amplifier (Tube)
Suggested Retail Price: unknown
Description: Pre-Amplifier
Manufacturer URL: Not Available
Manufacturer URL: Not Available

Review by 90493m ( A ) on July 24, 2004 at 07:09:33
IP Address: 65.124.37.12
Add Your Review
for the SL-1 Signature


CAT SL-1 Signature Mk II

Context: preamp was purchased to evaluate against my resident phono stage: Aesthetix IO Signature w/dual power supplies. The balance of the system is as follows: Digital – CEC TL-0 Mk II, modified Meitner Bidat DAC. Analog – Vyger Indian Signature TT with Dynavector Karat 17D2 and Ikeda EMPL cartridges. Micro Seiki SX 8000 TT, Schroeder Reference arm with ZYX 1000 Airy 2 cartridge, ELP laser TT.. Cables – Silversmith Palladium IC and speaker cables. Amps – Wavac 833A mono’s. Speakers – stacked Quad 57’s rebuilt by Wayne Piquet. Primary music preferences are singer/song writer, symphony and vintage rock.

The CAT SL-1 has a few interesting construction features which clue the owner in that Ken Stevens takes his design seriously. First off the cabinet of the preamp is constructed of a considerably heavier gauge metal than other preamps that I’m familiar with. The chassis feels almost as if it’s made of cast rather then sheet metal. Obviously this will help minimize acoustic feedback to the inner workings. Taking a look inside reveals that the chassis is further dampened with EAR polymer damping sheets. This is a fairly expensive damping material and is impressive to see it in use by a manufacturer.
The outboard power supply has a similar weight chassis and, unusually, has a permanent umbilical power cord connecting it to the main preamp chassis. While making the handling of the SL-1 a bit more difficult (you cannot disconnect the power supply from the preamp), this does eliminate one connection and prevent possible damage to the SL-1 from inadvertent power supply disconnects ( as can happen with the Aesthetix).
Another interesting feature is the impedance loading jacks for the phono stage. The phono stage is loaded via custom RCA plugs (one set of plugs for each different impedance level) which plug into the RCA jacks adjacent to the phono input. This allows the listener to quickly switch impedance while listening so as to gauge the sonic effects of the changes.

Upon listening to the SL-1 I was immediately struck by two strengths relative to the Aesthetix. First of all the bass is very un-tube like in its power and control yet very tube like in its nuance and subtly. The bass seems to combine the best features of solid state and tube circuitry, thus producing superior quality bass to anything I have experienced in the past out of a preamp . Secondly the SL-1 has considerably less distortion than the Aesthetix. This has two sonic benefits: the music sounds distinctly more life-like in its transparency (thus the SL-1 is significantly more transparent than the Aesthetix). There is also more information coming through on the SL-1. Low level information is revealed where it previously was lost. To me this is best heard in vocals where small inflections and changes of breath become apparent with the SL-1. This combined with the lower distortion and transparency take the listener closer to the real experience. What surprises me all the more is that the SL-1 uses only 6 tubes in the entire circuit to achieve these results, including the high gain MC gain stage. Yet the SL-1 phono stage is also considerably quieter than the Aesthetix. Clearly Ken Stevens is apparently as careful in his tube selection as he is in his circuitry design.
So where does the SL-1 fall short relative to the Aesthetix? The only clear attribute I’d give the nod to the Aesthetix on is its ability to bring vocals forward in the sound stage. This gives vocals more of an ‘in the room’ quality which I find attractive. The Aesthetix has more of a ‘lush’ sound but this comes at the expense of transparency. There is a light ‘haze’ and veil to the Aesthetix when compared to the SL-1. The Aesthetix seems to push the center of the sound stage forward relative to the sides.
The Aesthetix does seem to sound a little more dynamic at higher volume as well. But this may very well be due to higher distortion levels as a function of volume (distortion tends to make things sound louder than they are)
The SL-1 does not sound like a tube unit, nor does it sound like a solid state unit. It combines the best features of both, in my opinion. Low distortion, clear transparency, yet full harmonic integrity and SE – like detail and nuance reproduction - It’s very much of a ‘clear window’ view into the music. This ‘clear view’ however may reveal other parts of the audio system chain that are weaker. I could see where this would lead others to blame the SL-1 for qualities which are really attributable to other components in the system. I’m constantly surprised out how many ‘audiophiles’ claim they know all about music but don’t listen to live music (especially non-amplified music) Real music is not fuzzy and warm it is alive and vibrant with attack and resonant energy. ‘Warmth’ is really a subjective distortion present in most tube electronics. For this reason I would also offer that the ‘tube aficionados’ may not care for the SL-1 as much as other units because it lacks the ‘tube sound’, which is a distortion of sorts, albeit , a euphonic one. It is difficult to assemble a system that has true similarity to live music. You usually get an imbalance one way or the other because in the audiophile’s quest for perfection they wrongly think that by combining different equipment with different strength’s and weaknesses) they can ‘blend’ their system to get the perfect sound. Instead they end up with exactly what they assembled: a sort of sonic salad. The Sl-1 leaves no apparent sonic signature; it merely(?) seems to pass on what’s fed to it unadulterated.
Ken Stevens’s motto for CAT is “technology serving music” .His products are designed to be faithful to ALL aspects of the music not just some. There are no apparent trade offs in the sound of his equipment. CAT equipment will reveal the rest of your system for all of its attendant strengths and weaknesses.
If you value the sound of true, live music, you owe the SL1 and other CAT products a careful audition. They take the concept of transparency to new levels yet preserve the vital harmonic detail and low level musical information that SE designs are renown for. In the here and now I consider the CAT SL1 to be my reference preamplifier because it honors the music without adding anything of its own (that I can detect). Combined with other similarly transparent components and the effect is startlingly lifelike on good recordings.


Product Weakness: lacks mono switch
Product Strengths: Transparancy, low distortion, quiet phono stage, build quality, outstanding value


Associated Equipment for this Review:
Amplifier: Wavac 833
Preamplifier (or None if Integrated): Aesthetix IO
Sources (CDP/Turntable): Vyger tt
Speakers: stacked Quad 57
Cables/Interconnects: Silversmith
Music Used (Genre/Selections): rock, singer/songwriter, classical
Room Size (LxWxH): 20 x 14 x 10
Type of Audition/Review: Product Owner




This post is made possible by the generous support of people like you and our sponsors:
  VH Audio  



Topic - REVIEW: Convergent Audio Technology SL-1 Signature Amplifier (Tube) - 90493m 07:09:33 07/24/04 ( 3)