Home Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

RE: Fixed bias problem, and no, it is not the tubes.




My bias supplies. Note the poly type capacitors that last forever. I use two bias supplies. -19 volts for power 6V6GT tubes & -140 volts for the phase inverters. With bias the phase inverters do not need a large capacitor to ground. Hard to see, but the rectifier bridge is at the bottom. I used 4 diodes for each supply. The silver caps at bottom are .01uF @ 1000 volt capacitors across the bridges to shunt any possible noise. The bias supplies have less than .001 volts ripple.



Edits: 01/15/17

This post is made possible by the generous support of people like you and our sponsors:
  VH Audio  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.