Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here.

For Sale Ads FAQ / News / Events

AudioAsylum Trader Joule-Electra LA-100 MKIII - This is a stunner! JE made a customized, apparentl... Belles Research 200 - Selling a Belles 200 stereo amplifier. Nice powerf...

• Help with Rotel RB-990BX! - Roypercy 11:25:58 10/18/16 (14)
  • RE: Help with Rotel RB-990BX! - SgreenP@MSN.com 09:37:19 10/21/16 (1)
    • RE: Help with Rotel RB-990BX! - Roypercy 10:13:46 10/21/16 (0)
  • I think I dodged a bullet this time - Roypercy 20:12:48 10/20/16 (2)
    • RE: I think I dodged a bullet this time - airtime 09:18:48 10/21/16 (1)
      • RE: I think I dodged a bullet this time - Roypercy 10:37:14 10/21/16 (0)
  • Check the wire fully and - Awe-d-o-file 09:06:38 10/19/16 (2)
    • RE: Check the wire fully and - Roypercy 21:33:40 10/19/16 (1)
      • RE: Check the wire fully and - Awe-d-o-file 12:18:16 10/24/16 (0)
  • Hmmm - E-Stat 16:20:32 10/18/16 (5)
    • RE: Hmmm - Roypercy 18:31:44 10/18/16 (4)
      • RE: Hmmm - fredtr 06:41:20 10/19/16 (2)
        • RE: Hmmm - airtime 07:13:46 10/19/16 (1)
          • RE: Hmmm - fredtr 10:21:36 10/19/16 (0)
      • Well - E-Stat 05:47:41 10/19/16 (0)
• Amplifier cleaning out time... - Smelly_Socks 09:43:58 10/18/16 (7)
  • RE: Amplifier cleaning out time... - Postal Grunt 21:36:36 10/19/16 (1)
    • cleaning out the dust is not 'fixing' it.. IMO at least - Smelly_Socks 09:31:24 10/20/16 (0)
  • Damn... Do one, and all the others want to be clean too... - Smelly_Socks 11:17:19 10/19/16 (0)
  • Don't forget all the external contacts - E-Stat 13:57:47 10/18/16 (0)
  • RE: Amplifier cleaning - M3 lover 10:23:06 10/18/16 (2)
    • RE: Amplifier cleaning - Schurkey 22:41:21 10/18/16 (0)
    • Yeah, that would work out just great for most vintage tube equipment... - David S. 11:53:31 10/18/16 (0)
• I Need A Fan Recommendation - geezerrocket 12:58:13 10/17/16 (14)
  • RE: I Need A Fan ? - bare 14:43:57 11/10/16 (1)
    • RE: I Need A Fan ? - pictureguy 17:18:27 11/10/16 (0)
  • RE: I Need A Fan Recommendation - pictureguy 22:38:13 11/09/16 (0)
  • Good place to shop, Fans & cabinet HW too - erik_sq 10:12:28 10/29/16 (0)
  • here's one - rtbarr 21:30:55 10/25/16 (1)
    • RE: here's one - Sturgus 20:07:06 10/27/16 (0)
  • Antec - Bill Way 06:03:17 10/19/16 (0)
  • RE: I Need A Fan Recommendation - pictureguy 23:57:40 10/18/16 (0)
  • Fan Recommendation - M3 lover 10:33:25 10/18/16 (0)
  • RE: I Need A Fan Recommendation - Mick Wolfe 09:59:03 10/18/16 (0)
  • RE: I Need A Fan Recommendation - FenderLover 16:52:12 10/17/16 (0)
  • RE: I Need A Fan Recommendation - fredtr 16:08:26 10/17/16 (0)
  • RE: I Need A Fan Recommendation - krankkall 15:07:30 10/17/16 (0)
  • RE: I Need A Fan Recommendation - AbeCollins 14:30:41 10/17/16 (0)
• New JVC M7050 Power Amp - david5 10:58:38 10/17/16 (7)
  • RE: New JVC M7050 Power Amp - The Bored 16:21:17 10/17/16 (5)
    • RE: New JVC M7050 Power Amp - Awe-d-o-file 07:06:38 10/18/16 (4)
      • He's fishing - airtime 07:19:55 10/18/16 (3)
        • RE: He's fishing - Awe-d-o-file 08:28:45 10/18/16 (2)
          • RE: He's fishing - airtime 09:31:50 10/18/16 (1)
            • Just an innocent question IHMO... - AbeCollins 18:16:09 10/18/16 (0)
  • RE: New JVC M7050 Power Amp - bigshow 15:41:50 10/17/16 (0)
• RILEY XB30 guitaramp /schematic - Stewen 05:02:10 10/17/16 (1)
  • RE: RILEY XB30 guitaramp /schematic - FenderLover 06:50:17 10/17/16 (0)
• 3 questions on input and output specs - jmunky3 19:01:24 10/16/16 (3)
  • RE: 3 questions on input and output specs - John Elison 21:07:06 10/16/16 (2)
    • RE: 3 questions on input and output specs - jmunky3 04:32:56 10/17/16 (1)
      • RE: 3 questions on input and output specs - John Elison 08:19:27 10/17/16 (0)
• Battery powered phonostages - aarocks 07:14:44 10/15/16 (13)
  • RE: Battery powered phonostages - gordguide 11:54:10 10/26/16 (0)
  • RE: Battery powered phonostages - Raiderman 16:04:24 10/16/16 (1)
    • RE: Battery powered phonostages - johntoste 14:12:16 10/17/16 (0)
  • RE: Battery powered phonostages - AbeCollins 10:41:48 10/15/16 (9)
    • RE: Battery powered phonostages - aarocks 12:49:19 10/15/16 (8)
      • RE: Battery powered phonostages - erik_sq 20:03:18 10/15/16 (1)
        • RE: Battery powered phonostages - John Elison 20:47:01 10/15/16 (0)
      • Buy a power regenerator (Nt) - Jack G 15:35:10 10/15/16 (5)
        • What's a power regenerator? (Nt) - John Elison 17:16:53 10/15/16 (4)
          • RE: Are you serious? - Jeff Starr 18:10:04 10/15/16 (3)
            • RE: Are you serious? - John Elison 19:04:28 10/15/16 (2)
              • RE: Are you serious? - AbeCollins 20:28:58 10/15/16 (1)
                • Okay! I see your point. Thanks! /nt\ - John Elison 20:49:16 10/15/16 (0)
• Creek Audio 5350SE - no output - Bigdaddy999 14:33:49 10/14/16 (7)
  • RE: Creek Audio 5350SE - no output - Bigdaddy999 20:02:30 10/14/16 (4)
    • RE: Creek Audio 5350SE - no output - fredtr 17:20:18 10/16/16 (0)
    • RE: Creek Audio 5350SE - no output - airtime 07:46:15 10/15/16 (2)
      • RE: Creek Audio 5350SE - no output - Bigdaddy999 08:02:58 10/15/16 (1)
        • RE: Creek Audio 5350SE - no output - airtime 08:47:21 10/15/16 (0)
  • RE: Creek Audio 5350SE - no output - airtime 19:12:49 10/14/16 (0)
  • RE: Creek Audio 5350SE - no output - fredtr 16:43:33 10/14/16 (0)
• Rotel A14 Integrated - Isaak J. Garvey 11:08:12 10/14/16 (13)
  • RE: Rotel A14 Integrated - AudioSoul 12:45:03 10/14/16 (12)
    • RE: Rotel A14 Integrated - Isaak J. Garvey 12:54:36 10/14/16 (11)
      • RE: Rotel A14 Integrated - mrdavis842 10:28:01 10/15/16 (3)
        • RE: Rotel A14 Integrated - Isaak J. Garvey 15:23:51 10/15/16 (2)
          • RE: Rotel A14 Integrated - mrdavis842 20:29:14 10/15/16 (1)
            • RE: Rotel A14 Integrated - Isaak J. Garvey 07:46:34 10/16/16 (0)
      • RE: Rotel A14 Integrated - AudioSoul 13:35:02 10/14/16 (6)
        • RE: Rotel A14 Integrated - Isaak J. Garvey 16:09:33 10/14/16 (5)
          • RE: Rotel A14 Integrated - AudioSoul 18:19:38 10/14/16 (4)
            • RE: Rotel A14 Integrated - Isaak J. Garvey 18:27:49 10/14/16 (3)
              • Rip-off - ppopp 22:10:47 10/15/16 (0)
              • "Lps cut from digital files is a rip"... - DeKay 21:13:36 10/14/16 (1)
                • RE: "Lps cut from digital files is a rip"... - Isaak J. Garvey 09:01:57 10/15/16 (0)
• Psvane WE845 vs. Shugang WE845 replicas - jeony 05:58:01 10/14/16 (3)
  • RE: Psvane WE845 vs. Shugang WE845 replicas - airtime 08:13:08 10/14/16 (2)
    • RE: Psvane WE845 vs. Shugang WE845 replicas - airtime 16:18:00 10/15/16 (1)
      • I hold Jim McShane in the greatest regard, but ... - Dave Pogue 06:30:43 10/27/16 (0)
• Can choice of cables cause an amp to blow? - TGR 11:55:28 10/12/16 (71)
  • RE: Can choice of cables cause an amp to blow? - psn 00:32:12 10/31/16 (0)
  • RE: Can choice of cables cause an amp to blow? - gordguide 11:47:52 10/26/16 (0)
  • RE: Can choice of cables cause an amp to blow? - Inmate51 14:02:10 10/14/16 (0)
  • RE: Can choice of cables cause an amp to blow? - genungo 16:47:16 10/13/16 (0)
  • RE: Can choice of cables cause an amp to blow? - SgreenP@MSN.com 16:01:29 10/13/16 (0)
  • More on this - TGR 10:28:03 10/13/16 (9)
    • RE: More on this - PAR 14:28:55 10/13/16 (0)
    • What cables does the manufacturer recommend? - hawkmoon 13:50:54 10/13/16 (0)
    • RE: More on this - BCR 12:45:33 10/13/16 (6)
      • HaHa - but I have two systems - TGR 15:57:56 10/13/16 (5)
        • RE: HaHa - but I have two systems - BCR 17:16:51 10/13/16 (4)
          • RE: HaHa - but I have two systems - airtime 08:16:28 10/14/16 (3)
            • RE: HaHa - but I have two systems - BCR 11:21:30 10/14/16 (2)
              • RE: HaHa - but I have two systems - Crazy Dave 08:07:50 10/19/16 (1)
                • RE: HaHa - but I have two systems - BCR 08:48:17 10/19/16 (0)
  • This is how I wired my HT setup - airtime 08:07:52 10/13/16 (0)
  • Yes... - PAR 00:36:29 10/13/16 (36)
    • Note to self... - AbeCollins 16:46:28 10/13/16 (17)
      • RE: Note to self... - morricab 09:00:31 10/17/16 (0)
      • Not poor design, the cable is designed to be part of the network on the output stage - Dave_K 06:59:07 10/14/16 (15)
        • RE: Not poor design, the cable is designed to be part of the network on the output stage - hahax@verizon.net 10:15:28 10/15/16 (5)
          • RE: Not poor design -- But New Design Then (So You R Younger than I!) (nt) - goldenthal 16:49:30 10/15/16 (0)
          • RE: Not poor design, the cable is designed to be part of the network on the output stage - AbeCollins 10:52:44 10/15/16 (3)
            • RE: Not poor design, the cable is designed to be part of the network on the output stage - gordguide 06:08:25 11/11/16 (0)
            • RE: Not poor design -- Did Any Such Hi-cap Speaker-wire exist before Cobra? (nt) - goldenthal 16:52:48 10/15/16 (1)
              • RE: Not poor design -- Sorry, These were meant for Lower re Cobra (nt) - goldenthal 13:59:41 10/19/16 (0)
        • "designed to be part of the network" sounds like crappola - airtime 08:39:39 10/14/16 (8)
          • Not crappola if you folow the engineering principles - Dave_K 09:19:04 10/14/16 (7)
            • Naim speaker cables... - kuma 21:15:57 10/15/16 (0)
            • Crappola if you adhere to the philosophical principle... - AbeCollins 10:28:16 10/14/16 (5)
              • Don't give a crap about philosophy, just engineering - Dave_K 11:58:12 10/14/16 (4)
                • That's the problem with many engineers... - AbeCollins 14:01:30 10/14/16 (0)
                • No Dave you're wrong - airtime 13:00:06 10/14/16 (2)
                  • You have it backwards - Dave_K 13:36:46 10/14/16 (1)
                    • Reminder to self... - AbeCollins 14:09:41 10/14/16 (0)
    • RE: Yes... - Ralph 09:43:37 10/13/16 (5)
      • RE: Yes... Good Example Was Threshold 400A Which Just Shut Down (nt) - goldenthal 16:35:55 10/15/16 (2)
        • RE: Yes... Good Example Was Threshold 400A Which Just Shut Down (nt) - Crazy Dave 07:48:36 10/19/16 (1)
          • RE: Yes... Good Example Was Threshold 400A Which Just Shut Down (nt) - goldenthal 13:52:53 10/19/16 (0)
      • RE: Yes... - BCR 10:02:57 10/13/16 (1)
        • RE: Yes... Worked OK with My Mc 275 though, but Didn't Sound Better (nt) - goldenthal 16:39:07 10/15/16 (0)
    • RE: Yes... - Mick Wolfe 08:46:02 10/13/16 (0)
    • Yur kidding me - right ! - airtime 07:57:14 10/13/16 (10)
      • RE: Yur kidding me - right! -- Tell Nelson Pass (See Above) (nt) - goldenthal 16:42:09 10/15/16 (2)
        • I think you missed the point - airtime 08:09:59 10/16/16 (1)
          • I don't think [I] missed the point -- It is always possible . . . - goldenthal 12:11:03 10/16/16 (0)
      • Over the years a small number of amp designs have had the same sort of issue. stable only if.... - Smelly_Socks 08:19:57 10/13/16 (6)
        • RE: Over the years a small number of amp designs have had the same sort of issue. stable only if.... - airtime 08:45:16 10/13/16 (5)
          • RE: Over the years -- That Wire Design (Capacitance-Be-Damned) Was New & Unepected by Amp Mfrs (nt) - goldenthal 16:46:16 10/15/16 (0)
          • RE: Over the years a small number of amp designs have had the same sort of issue. stable only if.... - pictureguy 00:08:53 10/14/16 (3)
            • RE: Over the years a small number of amp designs have had the same sort of issue. stable only if.... - AbeCollins 06:48:16 10/14/16 (2)
              • RE: Over the years a small number of amp designs have had the same sort of issue. stable only if.... - pictureguy 22:56:29 11/24/16 (0)
              • What are you reading my mind - airtime 08:08:55 10/14/16 (0)
  • Not likely unless... - AbeCollins 22:29:51 10/12/16 (3)
    • RE: Not likely unless... - airtime 07:51:30 10/13/16 (1)
      • RE: Not likely unless... - AbeCollins 16:41:48 10/13/16 (0)
    • RE: Not likely unless... - fantja 23:08:04 10/12/16 (0)
  • RE: Can choice of cables cause an amp to blow? - hahax@verizon.net 20:34:30 10/12/16 (1)
    • Yep. - Jim Treanor 14:19:45 10/13/16 (0)
  • Instabilities induced by cables - FenderLover 18:59:12 10/12/16 (0)
  • ask the folks at Spectral - Curious 17:58:06 10/12/16 (0)
  • Audio Research - djk 15:51:29 10/12/16 (0)
  • Yes, if they're shorted! :-) /nt\ - John Elison 14:32:01 10/12/16 (2)
    • RE: Yes, if they're shorted! :-) /nt\ - Frihed89 00:11:55 10/13/16 (1)
      • RE: Yes, if they're shorted! :-) - John Elison 07:20:22 10/13/16 (0)
  • Yes - E-Stat 12:25:03 10/12/16 (5)
    • RE: "Ideally, do you know the LCR metrics?" - goldenthal 14:12:57 10/19/16 (0)
    • LCR - Prisoners 13:53:27 10/12/16 (3)
      • RE: LCR - TGR 13:56:29 10/12/16 (2)
        • I had some Audioquest cables that were problematic. - Prisoners 16:04:52 10/12/16 (0)
        • Yes - E-Stat 14:59:45 10/12/16 (0)
• Tube preamp sizzle then thump. Shut down the amp.. - Smelly_Socks 10:10:43 10/12/16 (2)
  • RE: Tube preamp sizzle then thump. Shut down the amp.. - 6bq5 10:29:23 10/12/16 (1)
    • Replaced tubes. everything works good. Finished as far as I am concerned. - Smelly_Socks 13:17:01 10/12/16 (0)
• Creek 4330se - 115v 50hz - py272 15:19:34 10/11/16 (8)
  • Congrats! I love this amplifier! - robertd 15:28:39 10/12/16 (0)
  • Thanks - py272 12:30:16 10/12/16 (0)
  • freq no concern voltage could be - Awe-d-o-file 08:10:12 10/12/16 (0)
  • OK - djk 15:54:46 10/11/16 (1)
    • I agree. nt Up is OK, down may cause the transformer to overheat. nt - Smelly_Socks 20:04:44 10/11/16 (0)
  • Nope. You will need a transformer to convert to 50 cycle. /nt\ - Opus 33 1/3 15:40:42 10/11/16 (2)
    • That is FALSE. you can upscale the frequency with good effects. - Smelly_Socks 20:03:49 10/11/16 (0)
    • RE: Nope. You will need a transformer to convert to 50 cycle. /nt\ - ahendler 16:15:11 10/11/16 (0)
• RILEY XB 30 combo - Stewen 09:12:27 10/11/16 (0)
• Quicksilver Silver 88 vs new Mono 120, anyone compare? - Theron D 08:28:57 10/11/16 (1)
  • RE: Quicksilver Silver 88 vs new Mono 120, anyone compare? - Tubegroover 10:46:37 10/12/16 (0)
• Disadvantage of Class A? - PaulF70 18:39:57 10/10/16 (37)
  • RE: Disadvantage of Class A? - gordguide 11:41:13 10/26/16 (0)
  • Reduced range of linearity for a given device (nt) - mgbpuff 06:36:15 10/13/16 (0)
  • Higher even order harmonic distortion (nt) - mgbpuff 06:30:22 10/13/16 (0)
  • RE: Disadvantage of Class A? - erik_sq 13:36:40 10/12/16 (6)
    • RE: Disadvantage of Class A? - PaulF70 16:07:22 10/14/16 (5)
      • RE: Disadvantage of Class A? - erik_sq 16:19:06 10/14/16 (4)
        • RE: Disadvantage of Class A? - PaulF70 16:22:47 10/14/16 (3)
          • RE: Disadvantage of Class A? - erik_sq 16:24:59 10/14/16 (2)
            • RE: Disadvantage of Class A? - PaulF70 16:27:04 10/14/16 (1)
              • RE: Disadvantage of Class A? - erik_sq 17:08:28 10/14/16 (0)
  • Your premise - Dave_K 03:58:34 10/12/16 (3)
    • RE: Your premise - PaulF70 06:46:25 10/12/16 (2)
      • RE: Your premise - Dave_K 11:54:45 10/12/16 (0)
      • RE: Your premise - A.Wayne 08:44:41 10/12/16 (0)
  • Circular argument - 13th Duke of Wymbourne 16:45:05 10/11/16 (1)
    • Plus one big thumbs up for 'doubt' LOL nt - Smelly_Socks 20:07:07 10/11/16 (0)
  • If there really were (other than efficiency) - E-Stat 15:02:06 10/11/16 (1)
    • RE: If there really were (other than efficiency) - mgbpuff 06:48:38 10/13/16 (0)
  • RE: Disadvantage of Class A? - fantja 11:37:03 10/11/16 (0)
  • A timely question. - Prisoners 08:31:52 10/11/16 (9)
    • Also - PaulF70 17:57:08 10/18/16 (0)
    • RE: A timely question. - PaulF70 08:41:52 10/11/16 (7)
      • Do all class A amps transition to AB at some point? - Prisoners 08:55:14 10/11/16 (6)
        • RE: Do all class A amps transition to AB at some point? - A.Wayne 21:08:17 10/11/16 (0)
        • RE: Do all class A amps transition to AB at some point? - hahax@verizon.net 20:49:20 10/11/16 (0)
        • Very good question - M3 lover 10:37:03 10/11/16 (0)
        • RE: Do all class A amps transition to AB at some point? - PaulF70 10:08:07 10/11/16 (2)
          • The main thing is HEAT. and waste of power.. - Smelly_Socks 20:27:09 10/11/16 (1)
            • RE: The main thing is HEAT. and waste of power.. Yes - A.Wayne 21:48:15 10/11/16 (0)
  • More expensive? Long warm-up times? - Feanor 06:00:40 10/11/16 (0)
  • RE: Disadvantage of Class A? - genungo 05:58:33 10/11/16 (0)
  • RE: Disadvantage of Class A? - RGA 21:50:28 10/10/16 (1)
    • RE: Disadvantage of Class A? - A.Wayne 21:05:09 10/11/16 (0)
  • RE: Disadvantage of Class A? - mkuller 20:52:09 10/10/16 (0)
  • Heat production. (n/t) - FenderLover 18:53:37 10/10/16 (2)
    • RE: Heat production. (n/t) - PaulF70 19:13:39 10/10/16 (1)
      • Not a minor thing - FenderLover 19:31:15 10/10/16 (0)
• Bryston 4B 3 Cubed Amp - stereo5 09:57:52 10/10/16 (11)
  • I own a Bryston 4B-SST² amp.. not a cubed, but almost the same... - Smelly_Socks 13:09:05 10/12/16 (3)
    • RE: I own a Bryston 4B-SST² amp.. not a cubed, but almost the same... - fantja 23:11:47 10/12/16 (2)
      • Not a 'do not like'. Rather I "like" some others MORE. - Smelly_Socks 15:39:59 10/13/16 (1)
        • RE: Not a 'do not like'. Rather I "like" some others MORE. - fantja 20:32:46 10/14/16 (0)
  • You still running Odyssey amps - G Squared 11:13:58 10/10/16 (6)
    • RE: You still running Odyssey amps - stereo5 12:00:40 10/10/16 (5)
      • I've never heard klaus' amps with Tritons, but - G Squared 18:10:25 10/10/16 (1)
        • RE: I've never heard klaus' amps with Tritons, but - stereo5 17:45:28 10/15/16 (0)
      • RE: You still running Odyssey amps - fantja 14:26:06 10/10/16 (2)
        • RE: You still running Odyssey amps - gordguide 11:57:55 10/26/16 (1)
          • RE: You still running Odyssey amps - fantja 14:32:47 10/26/16 (0)
• Stereo vs mono subwoofer output and the Parasound P5 preamp - tketcham 06:44:31 10/10/16 (19)
  • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - John Elison 11:47:17 10/11/16 (4)
    • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - tketcham 15:30:14 10/11/16 (3)
      • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - erik_sq 07:56:59 10/12/16 (0)
      • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - John Elison 17:58:26 10/11/16 (1)
        • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - tketcham 19:48:55 10/11/16 (0)
  • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - jeagle 17:13:04 10/10/16 (1)
    • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - tketcham 06:15:08 10/11/16 (0)
  • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - erik_sq 12:14:23 10/10/16 (9)
    • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - tketcham 16:45:57 10/10/16 (8)
      • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - erik_sq 16:50:25 10/10/16 (7)
        • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - tketcham 06:06:08 10/11/16 (6)
          • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - erik_sq 11:10:00 10/11/16 (5)
            • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - tketcham 16:06:30 10/11/16 (4)
              • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - Kal Rubinson 05:09:35 10/12/16 (3)
                • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - tketcham 06:50:05 10/12/16 (2)
                  • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - Kal Rubinson 08:09:12 10/12/16 (1)
                    • This should work perfectly... - tketcham 08:44:19 10/12/16 (0)
  • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - airtime 07:43:52 10/10/16 (1)
    • RE: Stereo vs mono subwoofer output and the Parasound P5 preamp - tketcham 10:30:33 10/10/16 (0)
• Poor mans amp/preamp cooler - kenzo 15:53:10 10/09/16 (5)
  • I was thinking - Awe-d-o-file 17:06:40 10/09/16 (4)
    • RE: I was thinking - kenzo 17:27:41 10/09/16 (3)
      • RE: I was thinking - bare 23:29:15 10/11/16 (2)
        • OTOH.., - genungo 06:52:24 10/12/16 (0)
        • RE: I was thinking - kenzo 06:37:13 10/12/16 (0)
• tube amps - Steve64 20:13:03 10/06/16 (8)
  • RE: tube amps - airtime 20:52:11 10/06/16 (7)
    • RE: tube amps - Tidycat1 21:19:57 10/06/16 (6)
      • RE: tube amps - mcgjohn@yahoo.com 09:34:19 10/07/16 (5)
        • RE: tube amps - triamp 08:57:02 10/09/16 (4)
          • RE: tube amps - airtime 09:32:23 10/09/16 (3)
            • RE: tube amps - triamp 10:11:30 10/09/16 (2)
              • RE: tube amps - 6bq5 08:35:32 10/10/16 (0)
              • RE: tube amps - airtime 11:05:05 10/09/16 (0)
• Sanders Magtech Amp - stereo5 13:13:22 10/03/16 (31)
  • RE: Sanders Magtech Amp - jsm71 07:47:45 10/09/16 (1)
    • RE: Sanders Magtech Amp - stereo5 11:00:27 10/09/16 (0)
  • RE: Sanders Magtech Amp - Charles Bridges 12:49:39 10/07/16 (12)
    • Well, being rated at 2400 Watts input means it MAY draw as much... - jeffreybehr 14:03:13 10/08/16 (0)
    • Huh? Sanders claims " it runs very cool" - Feanor 05:59:01 10/08/16 (10)
      • "stone cold" in fact! - Mick Wolfe 09:30:57 10/08/16 (9)
        • RE: "stone cold" in fact! - Charles Bridges 09:53:34 10/08/16 (8)
          • RE: "stone cold" in fact! - erik_sq 14:25:21 10/09/16 (2)
            • RE: "stone cold" in fact! - erik_sq 14:53:44 10/09/16 (0)
            • RE: "stone cold" in fact! - Charles Bridges 14:42:19 10/09/16 (0)
          • RE: "stone cold" in fact! - Mick Wolfe 12:27:48 10/08/16 (0)
          • RE: voltage regulator problem - genungo 12:10:38 10/08/16 (2)
            • RE: voltage regulator problem - angela100 19:23:21 10/08/16 (1)
              • Impressive customer service! - genungo 12:14:21 10/09/16 (0)
          • RE: "stone cold" in fact! - stereo5 09:59:50 10/08/16 (0)
  • RE: Sanders Magtech Amp - Douger 14:38:39 10/04/16 (2)
    • RE: Sanders Magtech Amp - stereo5 16:52:09 10/04/16 (1)
      • RE: Sanders Magtech Amp - mkuller 08:19:25 10/05/16 (0)
  • RE: Sanders Magtech Amp - rkeman 04:56:06 10/04/16 (12)
    • RE: Sanders Magtech Amp - erik_sq 08:53:48 10/04/16 (11)
      • RE: Sanders Magtech Amp - pictureguy 18:28:11 10/05/16 (10)
        • RE: Sanders Magtech Amp - stereo5 12:38:59 10/06/16 (2)
          • RE: Sanders Magtech Amp - erik_sq 14:21:45 10/09/16 (0)
          • RE: Sanders Magtech Amp - pictureguy 13:32:07 10/06/16 (0)
        • RE: Sanders Magtech Amp - erik_sq 18:42:50 10/05/16 (6)
          • RE: Sanders Magtech Amp - pictureguy 18:54:23 10/05/16 (5)
            • RE: Sanders Magtech Amp - E-Stat 07:48:43 10/06/16 (1)
              • RE: Sanders Magtech Amp - erik_sq 14:18:31 10/09/16 (0)
            • RE: Sanders Magtech Amp - A.Wayne 19:47:26 10/05/16 (0)
            • RE: Sanders Magtech Amp - erik_sq 18:58:34 10/05/16 (1)
              • RE: Sanders Magtech Amp - pictureguy 20:02:00 10/05/16 (0)
• Bi-Amping - Horizontal and Vertical - Lifer 16:41:02 10/02/16 (25)
  • RE: Bi-Amping - Horizontal and Vertical - SgreenP@MSN.com 21:18:20 10/04/16 (1)
    • Problem is teh main module a 2-way is port tuned to ~ ) 40 Hz but no HP filter - causing overload/cone-bounce - Timbo in Oz 21:58:46 10/04/16 (0)
  • Same approach I take with my HT - E-Stat 06:04:25 10/04/16 (1)
    • RE: Same approach I take with my HT - Lifer 12:31:01 10/04/16 (0)
  • Perhaps that is why I find the adjustment of frequency (now at 70 HZ) and the .. adjustments .. very finicky" - Timbo in Oz 23:16:57 10/03/16 (3)
    • RE: Perhaps that is why I find the adjustment of frequency (now at 70 HZ) and the .. adjustments .. very finicky" - Lifer 12:30:01 10/04/16 (2)
      • a correction, to use the Active crossover you would need to bypasss the passive LP crossover that is inside - Timbo in Oz 20:34:06 10/04/16 (1)
        • RE: a correction, to use the Active crossover you would need to bypasss the passive LP crossover that is inside - Kal Rubinson 05:56:33 10/05/16 (0)
  • RE: Bi-Amping - Horizontal and Vertical - A.Wayne 20:45:55 10/03/16 (1)
    • RE: Bi-Amping - Horizontal and Vertical - hahax@verizon.net 20:28:22 10/04/16 (0)
  • Sounds like horizontal to me. As far as I know, the term... - jeffreybehr 15:45:59 10/03/16 (1)
    • Review? - Timbo in Oz 23:37:20 10/03/16 (0)
  • RE: Bi-Amping - Horizontal and Vertical - erik_sq 08:48:17 10/03/16 (9)
    • RE: Bi-Amping - Horizontal and Vertical - Lifer 12:38:51 10/04/16 (3)
      • RE: Bi-Amping - Horizontal and Vertical - erik_sq 14:32:35 10/04/16 (2)
        • If you look at the review by Stereophile - Timbo in Oz 00:29:20 10/05/16 (0)
        • If you look at the review by Stereophile - Timbo in Oz 00:15:29 10/05/16 (0)
    • Review? - Timbo in Oz 23:39:06 10/03/16 (0)
    • RE: Bi-Amping - Horizontal and Vertical - pictureguy 20:02:45 10/03/16 (3)
      • RE: Bi-Amping - Horizontal and Vertical - erik_sq 20:17:11 10/03/16 (2)
        • RE: Bi-Amping - Horizontal and Vertical - pictureguy 20:52:41 10/03/16 (1)
          • Bi-amping with planars? - Timbo in Oz 00:06:56 10/04/16 (0)
  • Artemis Eos!!!!! - Kal Rubinson 06:45:00 10/03/16 (2)
    • See above? - Timbo in Oz 00:10:09 10/04/16 (0)
    • We took a pair in trade - Awe-d-o-file 09:17:42 10/03/16 (0)
• E-mail adress of Rogue Audio still up to date? - Nunki 12:02:00 10/02/16 (5)
  • RE: E-mail adress of Rogue Audio still up to date? - Nunki 04:04:35 10/03/16 (1)
    • RE: E-mail adress of Rogue Audio still up to date? - SpotcheckBilly12345 08:47:57 10/03/16 (0)
  • RE: E-mail adress of Rogue Audio still up to date? - Uncle Mike 03:48:19 10/03/16 (0)
  • RE: E-mail adress of Rogue Audio still up to date? - Nunki 13:57:41 10/02/16 (0)
  • RE: E-mail adress of Rogue Audio still up to date? - Uncle Mike 12:45:41 10/02/16 (0)
• Looking for Caps for Plinius 8150 - DanteD 05:04:53 09/27/16 (6)
  • RE: Looking for Caps for Plinius 8150 - airtime 11:51:17 10/02/16 (0)
  • RE: Looking for Caps for Plinius 8150 - Uncle Mike 08:17:32 09/27/16 (4)
    • RE: Looking for Caps for Plinius 8150 - mcgjohn@yahoo.com 09:30:13 09/27/16 (3)
      • RE: Looking for Caps for Plinius 8150 - pars 18:50:59 09/27/16 (2)
        • RE: Looking for Caps for Plinius 8150 - pars 18:53:57 09/27/16 (1)
          • RE: Looking for Caps for Plinius 8150 - DanteD 20:22:36 09/27/16 (0)
• Not enough power from Phono Preamp? - BMWDoctor 09:49:44 09/23/16 (19)
  • Just turn it up, maaate. - Timbo in Oz 13:33:33 10/01/16 (0)
  • RE: Not enough power from Phono Preamp? - Jonesy 07:25:35 09/24/16 (3)
    • RE: Not enough power from Phono Preamp? - akolegov 08:41:29 10/03/16 (0)
    • RE: Not enough power from Phono Preamp? - BMWDoctor 07:27:54 09/24/16 (1)
      • RE: Not enough power from Phono Preamp? - Jonesy 07:47:48 09/24/16 (0)
  • RE: Not enough power from Phono Preamp? - BMWDoctor 16:56:21 09/23/16 (6)
    • RE: Not enough power from Phono Preamp? - BCR 13:20:28 09/24/16 (2)
      • About "volume at 2 o'clock" - Bill Way 05:46:49 09/25/16 (1)
        • RE: About "volume at 2 o'clock" - BCR 06:14:14 09/25/16 (0)
    • RE: Not enough power from Phono Preamp? - PAR 02:30:40 09/24/16 (0)
    • RE: Not enough power from Phono Preamp? - John Elison 20:47:15 09/23/16 (1)
      • Yes - Awe-d-o-file 08:25:41 09/24/16 (0)
  • RE: Not enough power from Phono Preamp? - PAR 16:27:13 09/23/16 (0)
  • RE: Not enough power from Phono Preamp? - John Elison 11:36:27 09/23/16 (1)
    • Agree 2 O'Clock is the sweet spot on the dial. nt - Smelly_Socks 11:49:25 09/25/16 (0)
  • RE: Not enough power from Phono Preamp? - 6bq5 10:12:02 09/23/16 (2)
    • RE: Not enough power from Phono Preamp? - BMWDoctor 10:32:09 09/23/16 (1)
      • RE: Not enough power from Phono Preamp? - 6bq5 10:53:11 09/23/16 (0)
  • RE: Not enough power from Phono Preamp? - mcgjohn@yahoo.com 09:54:40 09/23/16 (0)
• Precision Fidelity M7 - kracked@swbell.net 12:22:24 09/22/16 (0)
• Phono preamp with Volume control - Vladi 07:51:01 09/22/16 (13)
  • Here is one to check out/search for online reviews (see link)... - DeKay 16:45:27 09/23/16 (0)
  • RE: Phono preamp with Volume control - BCR 02:54:03 09/23/16 (0)
  • RE: Phono preamp with Volume control - AbeCollins 19:27:05 09/22/16 (3)
    • RE: Phono preamp with Volume control - Vladi 23:58:25 09/22/16 (2)
      • RE: Phono preamp with Volume control - Vladi 00:00:31 09/23/16 (1)
        • What does that mean? (NT) - jeffreybehr 14:57:42 09/28/16 (0)
  • RE: Phono preamp with Volume control - Grinnell 17:45:07 09/22/16 (1)
    • RE: Phono preamp with Volume control - ChesshireCat 22:23:33 09/22/16 (0)
  • RE: Phono preamp with Volume control - Zombie 13:15:07 09/22/16 (2)
    • RE: Phono preamp with Volume control - Vladi 14:09:39 09/22/16 (1)
      • RE: Phono preamp with Volume control - Zombie 13:59:17 09/28/16 (0)
  • What's it going to be plugged into? - Awe-d-o-file 09:38:59 09/22/16 (0)
  • RE: Phono preamp with Volume control.. - John Elison 08:16:23 09/22/16 (0)
• older YBA amp service - digepix 10:51:23 09/21/16 (8)
  • RE: older YBA amp service - mcondo 05:19:52 09/22/16 (0)
  • RE: older YBA amp service - Blackdog 18:39:57 09/21/16 (4)
    • yep - Awe-d-o-file 09:43:29 09/22/16 (0)
    • RE: older YBA amp service - digepix 06:56:30 09/22/16 (2)
      • RE: older YBA amp service - Awe-d-o-file 08:28:45 09/24/16 (1)
        • RE: older YBA amp service - digepix 12:46:22 09/27/16 (0)
  • YBA Has a Distributor in the US - erik 14:15:53 09/21/16 (1)
    • RE: YBA Has a Distributor in the US - digepix 07:04:46 09/22/16 (0)
• Fosgate FAP-T1 Surround Processor - blgtrio 14:04:41 09/19/16 (3)
  • RE: Fosgate FAP-T1 Surround Processor - blgtrio 10:23:45 09/21/16 (0)
  • RE: Fosgate FAP-T1 Surround Processor - Awe-d-o-file 10:10:06 09/21/16 (0)
  • RE: Fosgate FAP-T1 Surround Processor - Dynamite Ham 13:13:03 09/20/16 (0)
• Wow.lets go back in time and drool. - Michael Samra 23:53:00 09/17/16 (28)
  • Reminds me of a shop in Atl from the 70s - E-Stat 18:09:54 09/20/16 (1)
    • RE: Reminds me of a shop in Atl from the 70s - jaydacus 19:20:54 09/20/16 (0)
  • I don't know. I kind of like the stereo shops in Hong Kong a lot better - alaskahiatt 13:24:20 09/20/16 (5)
    • I quite enjoy living in Hong Kong - RGA 19:12:16 09/22/16 (0)
    • THAT is drool gear... N/T - musetap 22:01:22 09/20/16 (1)
      • Even though I don't know as much as the rest of you folks about this gear, - alaskahiatt 23:07:03 09/20/16 (0)
    • RE: I don't know. I kind of like the stereo shops in Hong Kong a lot better - A.Wayne 19:06:15 09/20/16 (0)
    • aaaaaaaaaaaaaaaaaah - Yeah like that ! - airtime 14:01:40 09/20/16 (0)
  • My own experience of two different places... - Smelly_Socks 09:27:56 09/20/16 (0)
  • RE: Wow.lets go back in time and drool. - audiomaniac 19:01:48 09/19/16 (2)
    • RE: Wow.lets go back in time and drool. - raya 07:53:51 09/20/16 (1)
      • RE: Wow.lets go back in time and drool. - airtime 08:16:48 09/20/16 (0)
  • Reminded me a little of the... - Jim Treanor 17:25:18 09/19/16 (0)
  • I bet he has cassette decks, too - jedrider 12:16:58 09/19/16 (0)
  • Living in the past...(nt) - mkuller 09:46:38 09/19/16 (0)
  • Drool? Over that crap? - madisonears 08:25:50 09/19/16 (3)
    • RE: Drool? Over that crap? - Sondek 10:25:10 09/19/16 (0)
    • Thanks - airtime 08:54:48 09/19/16 (1)
      • RE: Thanks - Coner 09:22:26 09/19/16 (0)
  • It would be fun to dig deeper in the service area - airtime 07:50:01 09/18/16 (0)
  • RE: Wow.lets go back in time and drool. - Mike K 07:27:46 09/18/16 (0)
  • RE: Wow.lets go back in time and drool. - fantja 07:17:30 09/18/16 (0)
  • RE: Wow.lets go back in time and drool. - John Elison 01:33:26 09/18/16 (3)
    • Mini Pearl homage maybe? (nt) - Sondek 13:13:46 09/18/16 (0)
    • RE: Wow.lets go back in time and drool. - bcowen 07:50:03 09/18/16 (0)
    • RE: Wow.lets go back in time and drool. - fantja 07:18:34 09/18/16 (0)
  • What's the story? The video was from 2012. - J.Mac 01:25:58 09/18/16 (1)
    • When this video was posted in 2012 - 1973shovel 05:59:43 09/18/16 (0)
• Integrated needed for Joseph Audio Rm25XL - Rspark 13:11:45 09/17/16 (14)
  • RE: Integrated needed for Joseph Audio Rm25XL - Mick Wolfe 10:34:07 09/19/16 (1)
    • RE: Integrated needed for Joseph Audio Rm25XL - tincup 18:18:08 09/19/16 (0)
  • Every time I've heard Joseph speakers.. - Prisoners 10:07:06 09/19/16 (2)
    • RE: Every time I've heard Joseph speakers.. - Rspark 05:21:57 09/20/16 (1)
      • RE: Every time I've heard Joseph speakers.. - fantja 15:08:55 09/20/16 (0)
  • RE: Integrated needed for Joseph Audio Rm25XL - fantja 07:14:32 09/18/16 (2)
    • RE: Integrated needed for Joseph Audio Rm25XL - Rspark 08:32:34 09/18/16 (1)
      • RE: Integrated needed for Joseph Audio Rm25XL - mrdavis842 09:48:31 09/18/16 (0)
  • Have you thought about asking Joseph? - genungo 06:19:14 09/18/16 (0)
  • RE: Integrated needed for Joseph Audio Rm25XL - John Elison 01:38:19 09/18/16 (2)
    • RE: Integrated needed for Joseph Audio Rm25XL - armondo666 11:26:50 09/26/16 (0)
    • RE: Integrated needed for Joseph Audio Rm25XL - Rspark 05:44:21 09/18/16 (0)
  • RE: Integrated needed for Joseph Audio Rm25XL - Blackdog 16:36:05 09/17/16 (0)
  • I think - G Squared 16:29:12 09/17/16 (0)
• Interesting NAD C275BEE findings - airtime 09:05:20 09/17/16 (4)
  • RE: Interesting NAD C275BEE findings - bare 19:41:54 09/25/16 (3)
    • RE: Interesting NAD C275BEE findings - triamp 05:18:04 09/26/16 (2)
      • RE: Interesting NAD C275BEE findings - mrdavis842 18:11:25 09/26/16 (1)
        • RE: Interesting NAD C275BEE findings - katylied 12:47:25 09/27/16 (0)
• Dahlquist DQ-LP1 Electronic Crossover - Lew 18:08:29 09/13/16 (9)
  • Lew, sorry if I derailed your post. I hope that some of the answers - alaskahiatt 17:28:44 09/15/16 (0)
  • RE: Dahlquist DQ-LP1 Electronic Crossover - louie3 08:10:36 09/14/16 (6)
    • RE: Dahlquist DQ-LP1 Electronic Crossover - kentaja 13:39:29 09/14/16 (1)
      • RE: Dahlquist DQ-LP1 Electronic Crossover - louie3 13:57:27 09/14/16 (0)
    • I have a fully upgraded LP1 in my system, but I need help with adjusting resistance. - alaskahiatt 10:12:33 09/14/16 (3)
      • RE: I have a fully upgraded LP1 in my system, but I need help with adjusting resistance. - louie3 10:49:59 09/14/16 (2)
        • Thanks very much. That's too easy. My system pictured is in my - alaskahiatt 11:42:26 09/14/16 (1)
          • RE: Thanks very much. That's too easy. My system pictured is in my - louie3 12:34:55 09/14/16 (0)
  • RE: Dahlquist DQ-LP1 Electronic Crossover - BCR 02:42:02 09/14/16 (0)
• Revel F52`s and Horizontal Bi-Amping - s-a-k 12:17:18 09/13/16 (26)
  • RE: Revel F52`s and Horizontal Bi-Amping - pictureguy 18:35:08 12/21/16 (4)
    • RE: Revel F52`s and Horizontal Bi-Amping - s-a-k 05:41:20 12/25/16 (3)
      • RE: Revel F52`s and Horizontal Bi-Amping - pictureguy 08:53:15 12/25/16 (2)
        • RE: Revel F52`s and Horizontal Bi-Amping - s-a-k 13:09:19 12/25/16 (1)
          • RE: Revel F52`s and Horizontal Bi-Amping - pictureguy 13:22:40 12/25/16 (0)
  • RE: Revel F52`s and Horizontal Bi-Amping - Mr Peabody 13:29:17 09/15/16 (4)
    • RE: Revel F52`s and Horizontal Bi-Amping - s-a-k 06:54:31 09/16/16 (3)
      • RE: Revel F52`s and Horizontal Bi-Amping - Mr Peabody 15:57:03 09/16/16 (2)
        • RE: Revel F52`s and Horizontal Bi-Amping - s-a-k 09:14:55 09/17/16 (1)
          • RE: Revel F52`s and Horizontal Bi-Amping - s-a-k 13:45:53 12/18/16 (0)
  • RE: Revel F52`s and Horizontal Bi-Amping - pictureguy 11:06:24 09/15/16 (0)
  • I do a passive horizontal bi amp - Awe-d-o-file 08:53:18 09/14/16 (1)
    • RE: I do a passive horizontal bi amp - s-a-k 09:19:18 09/14/16 (0)
  • RE: Revel F52`s and Horizontal Bi-Amping - s-a-k 08:19:53 09/14/16 (1)
    • RE: Revel F52`s and Horizontal Bi-Amping - Awe-d-o-file 09:35:46 09/14/16 (0)
  • RE: Revel F52`s and Horizontal Bi-Amping - SgreenP@MSN.com 21:43:29 09/13/16 (0)
  • RE: Revel F52`s and Horizontal Bi-Amping - hahax@verizon.net 20:24:28 09/13/16 (2)
    • RE: Revel F52`s and Horizontal Bi-Amping - neolith 05:14:31 09/14/16 (1)
      • RE: Revel F52`s and Horizontal Bi-Amping - hahax@verizon.net 05:37:10 09/14/16 (0)
  • RE: Revel F52`s and Horizontal Bi-Amping - s-a-k 16:42:07 09/13/16 (3)
    • RE: Revel F52`s and Horizontal Bi-Amping - neolith 17:56:18 09/13/16 (2)
      • Unless he can find an active crossover that matches the eq, and slopes of the passive OEM item - Timbo in Oz 02:19:13 09/14/16 (1)
        • I agree. - neolith 04:38:56 09/14/16 (0)
  • The bass crossover is at 200-220 Hz, so I would give it a go - Timbo in Oz 15:39:12 09/13/16 (0)
  • RE: Revel F52`s and Horizontal Bi-Amping - neolith 14:57:34 09/13/16 (1)
    • RE: Revel F52`s and Horizontal Bi-Amping - bigshow 15:34:17 09/13/16 (0)
• Rogue Metis Magnum, RIP? - mbnx01 15:53:02 09/11/16 (6)
  • RE: Rogue Metis Magnum, RIP? - GCP 04:12:42 09/17/16 (0)
  • RE: Rogue Metis Magnum, RIP? - svisner 10:14:51 09/15/16 (0)
  • RE: Rogue Metis Magnum, RIP? - AudioSoul 17:50:58 09/11/16 (3)
    • RE: Rogue Metis Magnum, RIP? - RGA 01:33:28 09/13/16 (0)
    • RE: Rogue Metis Magnum, RIP? - mbnx01 22:38:23 09/11/16 (1)
      • RE: Rogue Metis Magnum, RIP? - classfolkphile 05:16:30 09/12/16 (0)

Threads started on or before 4/30/07 are archived Here.
Threads started on or before 4/15/07 are archived Here.
Threads started on or before 3/31/07 are archived Here.
Threads started on or before 3/15/07 are archived Here.
Threads started on or before 2/28/07 are archived Here.

---

[ Top of Page ] [ Contact Us ] [ Support/Wish List ] [ Copyright © 2017, Audio Asylum, all rights reserved ] [ Take5 ]

---

[ General ] [ Speakers ] [ Tubes ] [ Vinyl ] [ Digital ] [ Hi-Rez ] [ Video Asylum ] [ Cables ] [ Tweaks/DIY ] [ Music ] [ Films ]

---