|
Audio Asylum Thread Printer Get a view of an entire thread on one page |
For Sale Ads |
45.72.138.80
In Reply to: RE: Confusion at MX110 12AX7 tube results posted by Michael Samra on December 31, 2016 at 11:40:18
I believe I added those three pics afterwards! Check to see them and please let me know if I'm alright here.
Thank you Michael!
Paul
Follow Ups:
Just as I thought..Those cans are original and they need to be replaced with quad 50s at 500v.It is hard to put in tons of extra capacitance in those other than for the filament circuit which I use a pair of 4700uf at 35v which is perfect..You need a pair of quad 50s at 500v and a pair 4700uf at 35v and the one for the cardboard cap may have been changed from what I see.Also,put Schotky diodes in the thing and if you do this stuff,you will adore your preamp again.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
Edits: 01/01/17
That's better news!
The cardboard cap is original. Apparently half of it died and leaked so that's the reason for the extra cap underneath.
Would it be possible to get a list according to schematic of what to get and by what company (keeping the original sound please) of cap?
You mentioned and where your recommended diodes go?
Thanks for this!!!
Paul
Paul
The cardboard cap has to go as well but I didn't mention it as I wasn't sure it was replaced underneath and glued in.
"For every complex problem there is an answer that is clear, simple, and wrong" H. L. Mencken
So that's three cap cans. Is it possible to get a small parts list and what to do for this so I may order it?
My email is paul.kehayas@gmail.com
I thank you for all the attention and help!
Paul
Post a Followup:
FAQ |
Post a Message! |
Forgot Password? |
|
||||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: