Tubes Asylum Questions about tubes and gear that glows. FAQ |
|
The speaker selector switch on my beloved 101C self destructed. I tried bypassing it by tying the common black on the output trannies with the common on the speaker outputs together. It works but now the balance pots work as a gain. There were 7 wires going to the selector switch. 2 common speakers terminals. 2 black wires to the output trannies. 1 to the center channel output ground and 2 that go to the headphone jack.
Still waiting on the schematic from the Fisher doc. I found one online but it's too confusing trying to work off the computer.Any suggestions?
I replaced all the caps and electrolytics way back and the voltages are all still dead on.I'm missing something here. Anyway to source a selector switch or similiar? I don't use the headphone jack (use a 400 for that) so it really doesn't matter but it would be nice to have it 100%
Thankss in advance
This post is made possible by the generous support of people like you and our sponsors:
Topic - Question about bipassing Fisher x-101-c speaker selector switch - henrybasstardo 10:47:28 11/30/06 (2)
- Here is a schematic on line for that switch - dadbar 13:27:42 11/30/06 (0)
- Re: Question about bipassing Fisher x-101-c speaker selector switch - el_37 12:52:18 11/30/06 (0)